abnengineer
NAXJA Forum User
- Location
- Huntsville, AL
1995 Jeep Cherokee Sport 4 Door 4WD
$7500
Front Axle- Dana 30 High Pinion Non Disconnect- (Following are new) Parts Mike Dana 44 Flat top knuckles, Hi Steer Arms, DOM Drag Link and Tie Rod, Drop Pitman Arm, Rubicon Heavy Duty Steering Brace, Warn Supreme Locking Hubs, 4.11 Gears, Detroit Tru-Trac Differential, Rubicon Springs, JKS ACOS adjustable front coil system, Clayton Hard Arm Long Radius Arms, Bilstein Shocks, Crane heavy duty differential Cover, Ford ½ ton disc brakes
Rear Axle - Currie Custom Built Dana 44, (Following are new) Teraflex Rear Disc Brakes, 4.11 Gears, Currie 31 spline axles, Detroit Soft Locker, Rubicon Springs, Tom Woods rear driveshaft, Bilstein shocks, Crane heavy duty differential cover
Engine & Transmission- stock 4.0L HO with Performance Distributors coil, spark plugs wires, rotor and cap. Bosch platinum plugs, Hesco throttle body spacer, K&N air filter, Banks stainless header and muffler, new 3 row radiator, new double roller timing chain, 40 lbs oil pressure at idle, 60 lbs at 55 mph
Stock AW-4 automatic transmission
Transfer Case- New JB Conversions heavy duty NP231 with shorty rear output. Novak Enterprises transfer case shifter
Tires and wheels- Bridgestone 33x12.50 AT tires (less than 500 miles) Stockton Wheel powder coated steel wheels
5 on 5 1/2 pattern
Interior- New Wet Okole seat covers, new Pioneer satellite ready stereo w/ CD with Infinity speakers, new vinyl floor covering, power windows and door locks
Less than 500 miles since build; none off road.
Located in Huntsville, Alabama
Serious Inquiries Only: Call 256/783-1127 or 256/881-9106
Pictures at this site:
http://tellicorick.myphotoalbum.com/view_album.php?set_albumName=album02
$7500
Front Axle- Dana 30 High Pinion Non Disconnect- (Following are new) Parts Mike Dana 44 Flat top knuckles, Hi Steer Arms, DOM Drag Link and Tie Rod, Drop Pitman Arm, Rubicon Heavy Duty Steering Brace, Warn Supreme Locking Hubs, 4.11 Gears, Detroit Tru-Trac Differential, Rubicon Springs, JKS ACOS adjustable front coil system, Clayton Hard Arm Long Radius Arms, Bilstein Shocks, Crane heavy duty differential Cover, Ford ½ ton disc brakes
Rear Axle - Currie Custom Built Dana 44, (Following are new) Teraflex Rear Disc Brakes, 4.11 Gears, Currie 31 spline axles, Detroit Soft Locker, Rubicon Springs, Tom Woods rear driveshaft, Bilstein shocks, Crane heavy duty differential cover
Engine & Transmission- stock 4.0L HO with Performance Distributors coil, spark plugs wires, rotor and cap. Bosch platinum plugs, Hesco throttle body spacer, K&N air filter, Banks stainless header and muffler, new 3 row radiator, new double roller timing chain, 40 lbs oil pressure at idle, 60 lbs at 55 mph
Stock AW-4 automatic transmission
Transfer Case- New JB Conversions heavy duty NP231 with shorty rear output. Novak Enterprises transfer case shifter
Tires and wheels- Bridgestone 33x12.50 AT tires (less than 500 miles) Stockton Wheel powder coated steel wheels
5 on 5 1/2 pattern
Interior- New Wet Okole seat covers, new Pioneer satellite ready stereo w/ CD with Infinity speakers, new vinyl floor covering, power windows and door locks
Less than 500 miles since build; none off road.
Located in Huntsville, Alabama
Serious Inquiries Only: Call 256/783-1127 or 256/881-9106
Pictures at this site:
http://tellicorick.myphotoalbum.com/view_album.php?set_albumName=album02
Last edited: