Fred85
NAXJA Forum User
- Location
- Orange, VA
i've read a few write ups on this, but they're always dedicated to older models
after reading this write-up: http://www.olypen.com/craigh/charge.htm
i decided to go ahead and do this mod
however after tracking down and tracing the alternator wire i realized that it just runs straight from the alt to the same post on the pdc that the battery to pdc cable goes to..........and i don't appear to have the two 60A fuses mentioned in the write up, unless they are labeled as something else
it seems to me that there is no need for a separate megafuse on the alt wire, and i can just run it straight from the alt to the pdc with no fusing........is this true for the later models??? i'm a little confused
after reading this write-up: http://www.olypen.com/craigh/charge.htm
i decided to go ahead and do this mod
however after tracking down and tracing the alternator wire i realized that it just runs straight from the alt to the same post on the pdc that the battery to pdc cable goes to..........and i don't appear to have the two 60A fuses mentioned in the write up, unless they are labeled as something else
it seems to me that there is no need for a separate megafuse on the alt wire, and i can just run it straight from the alt to the pdc with no fusing........is this true for the later models??? i'm a little confused