MONSTERxbla
NAXJA Forum User
- Location
- Fresno
I have the arb headlight harness with some ipf h4's(with fatboys) and am having an issue with not being able to turn off the hi beams after they are switched on. the only way I can turn them off is by turning the lights off then back on. I found that when the headlight switch is on(low beam) I have 6 volts at the relay and when the hi beams are turned on I have 12 volts. I know that I should not have 6 volts when the low beams are on. I think that that is not enough voltage to energize the relay but enough to not allow it to de-energize. anybody else have a this problem.