Amc 20

[Eagle]

I put 4.88s in mine. They exist.

Thanks. So much for Internet research ... party1:

BTW -- for anyone interested, the ring gear is 8-7/8" diameter, and the axle shafts are 1.25" with 29 splines. Which makes the shafts beefier than the 29-spline 8.25 axle, and the ring gear is actually larger than a Dana 44. It's probably possible to break one of these, but I think you'd have to be trying rather hard.

 

[jmaxj]

Thanks. So much for Internet research ... party1:

BTW -- for anyone interested, the ring gear is 8-7/8" diameter, and the axle shafts are 1.25" with 29 splines. Which makes the shafts beefier than the 29-spline 8.25 axle, and the ring gear is actually larger than a Dana 44. It's probably possible to break one of these, but I think you'd have to be trying rather hard.

well i know i've beat mine and it hasn't broke i did how ever break lug nut studs off once.

 

[Root Moose]

RE: ratios lower than 4.56... This must be a newish development because they didn't exist before. There have been new gearsets developed by the aftermarket before. Wasn't aware of the ones available for the AMC20.

 

[JnJ]

http://www.quadratec.com/cgi-bin/sg...QA=1&UREQB=2&UREQC=3&UREQD=4&FNM=00&x=47&y=37

Over a year ago when I got mine....