DeftwillP
NAXJA Forum User
- Location
- Round Rock TX
I need to get this thing going sooner or later. I'll try to update over the next day or two what's been done to it.
body:
HDO middle frame stiffeners
stock rockers cut out and replaced with 3/16" 2x6 box steel
front HD bumper tie ins but currently no bumper lol....ready for any winch style bumper with 3 bolts per side
doors come off and get put back on without tools....wires are disco'd with cheap trailer harnesses (last I checked, all windows and locks still work)
suspension:
roughly 4.5" of mixed parts lift (no spacers or cheap AAL)
shackle box relocators with longer shackles
bilstein 51xx series reservoir up front and bilstein non-res in back
leafs are nice and flat so they articulate well but still hold the jeep up at the right height
axles:
dana 30 with cryo treated 4.88's and a loc-rite
alloy shafts will full circle clips
back up set of big joint stockers with full circle clips
zj steering and after market HD drop-trackbar setup (mix of tnt and others)
8.25 with 4.88's and aussie along with zj disc conversion
Gotta go to a meeting...I'll try to get the rest in a bit
body:
HDO middle frame stiffeners
stock rockers cut out and replaced with 3/16" 2x6 box steel
front HD bumper tie ins but currently no bumper lol....ready for any winch style bumper with 3 bolts per side
doors come off and get put back on without tools....wires are disco'd with cheap trailer harnesses (last I checked, all windows and locks still work)
suspension:
roughly 4.5" of mixed parts lift (no spacers or cheap AAL)
shackle box relocators with longer shackles
bilstein 51xx series reservoir up front and bilstein non-res in back
leafs are nice and flat so they articulate well but still hold the jeep up at the right height
axles:
dana 30 with cryo treated 4.88's and a loc-rite
alloy shafts will full circle clips
back up set of big joint stockers with full circle clips
zj steering and after market HD drop-trackbar setup (mix of tnt and others)
8.25 with 4.88's and aussie along with zj disc conversion
Gotta go to a meeting...I'll try to get the rest in a bit