97babyXJ
NAXJA Forum User
- Location
- Metuchen, NJ
It been too long.
Started ripping this thing apart about 4 years ago, between school, being broke, and daily driven cars that needed work to, this thing is finally starting to get back together.
First day of dis-assembly, about 4 years ago.
Motor starting to be assembled, basically a stock build.
Bored .030 over, decked for flatness, crank cut .010.
Pre 96 cam/lifters, double roller timing chain.
Head got a basic rebuild, new seals, seats, springs+retainers, head bolts.
(Cant remember if it got new valves)
99+ intake opened up a bit to match head ports.
Throttle body, bored slightly below butterfly, not sure how this will work out, wel see.
...........
Started ripping this thing apart about 4 years ago, between school, being broke, and daily driven cars that needed work to, this thing is finally starting to get back together.
First day of dis-assembly, about 4 years ago.
Motor starting to be assembled, basically a stock build.
Bored .030 over, decked for flatness, crank cut .010.
Pre 96 cam/lifters, double roller timing chain.
Head got a basic rebuild, new seals, seats, springs+retainers, head bolts.
(Cant remember if it got new valves)
99+ intake opened up a bit to match head ports.
Throttle body, bored slightly below butterfly, not sure how this will work out, wel see.
...........