CAMO XJ
NAXJA Forum User
- Location
- Cherryville
1. Year of your XJ/MJ.
1994 jeep cherokee xj sport
2. Engine (I.E.: 4.0, 2.5, 2.8).
4.0 inline 6
3. Transmission (Manual or auto).
auto and I make the assumption its an aw4
4. Differential/transfer case.
dana 30/35 with a np231
5. Any other model year specific info that would apply to your tech question.
Ok Here is the problem. The Jeep has 205k and the trans has shifted fine until today. I had a guy coming to buy it so I went outside to drive it to the store one last time and.........
I put it in drive which is how I drive it around town so it wont shift to od and lug with the stock gearing, and it wont pull. You could give it gas and feel that it was trying to move but wouldnt. I then pulled it down into what the shifter says as 2 and it takes off fine. You can then shift it up through all the gears fine. However when giving it gas to use a passing gear it will not gear itself down. When you come to a stop you have to downshift it and take off. Its almost like a manual valvebody in a c4 or something. Any ideas what the problem is? I adjusted the cable on the tb hoping that would help and nothing.
1994 jeep cherokee xj sport
2. Engine (I.E.: 4.0, 2.5, 2.8).
4.0 inline 6
3. Transmission (Manual or auto).
auto and I make the assumption its an aw4
4. Differential/transfer case.
dana 30/35 with a np231
5. Any other model year specific info that would apply to your tech question.
Ok Here is the problem. The Jeep has 205k and the trans has shifted fine until today. I had a guy coming to buy it so I went outside to drive it to the store one last time and.........
I put it in drive which is how I drive it around town so it wont shift to od and lug with the stock gearing, and it wont pull. You could give it gas and feel that it was trying to move but wouldnt. I then pulled it down into what the shifter says as 2 and it takes off fine. You can then shift it up through all the gears fine. However when giving it gas to use a passing gear it will not gear itself down. When you come to a stop you have to downshift it and take off. Its almost like a manual valvebody in a c4 or something. Any ideas what the problem is? I adjusted the cable on the tb hoping that would help and nothing.