jeepfreak1020
NAXJA Forum User
- Location
- Thornton
So im at point of trying to find my rear axle for my build. My front is a full width HP 44 out of 77 F150. Will be built the the hills and about 68 wms to wms. My question is what should I run for the rear? I Will put a ARB in whatever rear end goes in along with cromo shafts and 4.88 gears.
Finding a 9 inch in CO is hard and people want $500-$600 for them. Most junkyard ones are big bearing, and bent. Im having a hard time finding one. I was thinking of doing a 44 rear, but once again, rare to find a xj or one thats going to work. I did though just find a 8.8 alread geared to 4.88 for $400. do a super 88 and then run spacers and rear should come out to about 65 wms to wms, which isent bad at all I dont think. Im leaning town snaggin it up since it already has the gears in it, so I wouldent have to buy them. Already buying cromo shafts so that gets rid of the c-clip. What do you guys think?
60 or 14 bolt is not a option so dont even bring that into the question.
Finding a 9 inch in CO is hard and people want $500-$600 for them. Most junkyard ones are big bearing, and bent. Im having a hard time finding one. I was thinking of doing a 44 rear, but once again, rare to find a xj or one thats going to work. I did though just find a 8.8 alread geared to 4.88 for $400. do a super 88 and then run spacers and rear should come out to about 65 wms to wms, which isent bad at all I dont think. Im leaning town snaggin it up since it already has the gears in it, so I wouldent have to buy them. Already buying cromo shafts so that gets rid of the c-clip. What do you guys think?
60 or 14 bolt is not a option so dont even bring that into the question.