PapaGeno21
NAXJA Forum User
- Location
- Rhode Island
Ok so my friend Sam gave me a wicked good idea.
Im gonna get the 8.8 Axle and then some wheel spacers.. I can get a 95+ Axle for 200 bucks at my local junkyard.
My friend is a welder, so we can do the perches. While im doing the perches, I will angle it up so I dont ned shims for the SYE im installing.
Anyways, I am going to try and get one with 4:10 gears, then I will grab a Dana 30 from a 4Cylinder XJ with the 4:10 gears...
Then I will install a 1.5" Spacer and 1.5" Shackle in there while im installing the new axles.
Question is...
Will the front driveshaft work as a rear with the SYE on the 8.8 when I get the flange adapter so I can mount it normally?
Can 4:10's work with 33-34's?
Im gonna get the 8.8 Axle and then some wheel spacers.. I can get a 95+ Axle for 200 bucks at my local junkyard.
My friend is a welder, so we can do the perches. While im doing the perches, I will angle it up so I dont ned shims for the SYE im installing.
Anyways, I am going to try and get one with 4:10 gears, then I will grab a Dana 30 from a 4Cylinder XJ with the 4:10 gears...
Then I will install a 1.5" Spacer and 1.5" Shackle in there while im installing the new axles.
Question is...
Will the front driveshaft work as a rear with the SYE on the 8.8 when I get the flange adapter so I can mount it normally?
Can 4:10's work with 33-34's?