94XJSE
NAXJA Forum User
- Location
- Central IL
What do you guys think about the idea of a 5.2 out of a grand into a
cherokee? Would it be alot of work?
cherokee? Would it be alot of work?
j99xj said:Not to be rude or anything, but if you want a 5.2 just get a Grand Cherokee with the 5.2, or better yet, 5.9.
But if you were going to go to the trouble of a V8 swap, make it something worthwhile like a 454 or a 383.
So what'd you do about wiring, new PCM? What transmission? Do you have any pictures?5.2poweredxj said:I did it. If the driver side rubber mount bad then you can bolt the driver side right where the 4.0 was where the track mount is. Just drill and bolt in the rest of the holes in the mount. Passenger side a little tougher nothing to go off other than measure it from the firewall to edge of the mount.
Biggest thing I had to mod was the rear driveshaft since it about 2" longer than 4.0 drivetrain.
You need to have some lift since if you don't the front axle will hit the oil pan so that might be something to consider. I got f150 front coils in mine so I don't have alot flex.
Is that yours 91?91 Jeep Project said:For Good Measure
90PioSport99 said:Is that yours 91?