NCCherokee
NAXJA Forum User
- Location
- Anderson, SC
I have the oppurtunity to pick up 4 33x12.4R15 BFG MTs with 90% tread left for $100/tire. Right now, i have the RE 3.5" superflex lift. I'm trimmed quite a bit all the way around, with 4 rear TJ flares all the way around. I have room to trim more up front, used the cut and fold method in the rear. Currently, i have 31x10.5 dayton MTs. My rims are 15x8 with 4" of backspacing, and i dont rub anywhere, flexed or not.
Can i fit these tires, on my rims, maybe with additional trimming, and get away without significant rubbing under daily driver status? I could add and extended shackle and a spacer up front for another inch of clearance, and bumpstops if i need to.
The reason i really wanna do this is because the tires are cheap, and i'm going to regear this summer. I have the 8.25" in the rear of my 99, and the deepest you can go anyways is 4.56, which i think would be good for 33s. I'd hate to gear to 4.10s for 31s, and then lift it more and go to 33s, just to be where i am at right now with stock gears.
So, can they fit with more trimming, another 1" of lift, and possible bumpstopping?
here are pictures of it, i dont know how to post them here, or if i even can:
http://www.usjeeps.com/members/p686-1138143167.jpg
http://www.usjeeps.com/members/p686-1138143181.jpg
http://www.usjeeps.com/members/p686-1138143148.jpg
http://www.usjeeps.com/members/p686-1137126847.jpg
i dont have any pictures of it with the TJ flares on, cus my camera "disappeared" itself over spring break.
flame on
Can i fit these tires, on my rims, maybe with additional trimming, and get away without significant rubbing under daily driver status? I could add and extended shackle and a spacer up front for another inch of clearance, and bumpstops if i need to.
The reason i really wanna do this is because the tires are cheap, and i'm going to regear this summer. I have the 8.25" in the rear of my 99, and the deepest you can go anyways is 4.56, which i think would be good for 33s. I'd hate to gear to 4.10s for 31s, and then lift it more and go to 33s, just to be where i am at right now with stock gears.
So, can they fit with more trimming, another 1" of lift, and possible bumpstopping?
here are pictures of it, i dont know how to post them here, or if i even can:
http://www.usjeeps.com/members/p686-1138143167.jpg
http://www.usjeeps.com/members/p686-1138143181.jpg
http://www.usjeeps.com/members/p686-1138143148.jpg
http://www.usjeeps.com/members/p686-1137126847.jpg
i dont have any pictures of it with the TJ flares on, cus my camera "disappeared" itself over spring break.
flame on