taylorworld
NAXJA Forum User
- Location
- East TN
ok i have searched and searched. i have a 1994 XJ 4.0L, AW4, 231. that transfer case is shot and im trying to replace it. i bought a 1996 XJ 231 with the 1997 up style output shaft to replace it. im going to put a SYE in it. BUT, the input shafts are different lengths. from the mating surface of the tranfer case to the end of the input shaft measures 1.195" for the 1994 model and 1.365" for the 1996 model. does the 0.170" diffence matter? are the newer 1997+ AW4 transmissions and transmission output shaft a little different to accept this? i put some grears on the shafts and put the new tranfer case on to measure how far in it goes on the splines and its VERY close to hitting the non splined part of the transmission output shaft. has anybody put a 1997+ 231 on a 1994 or older?