• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

2000 XJ part out, lots of goodies!

***Updated List***

First gen. Wilderness Roof rack, includes highlift mount, spare tire mount, rack for shovel/axe and the eyehooks on the front for the 4 spotlights, crossbar on rear drilled for 2 backup lights- $250

tan leather seat from older xj, really good shape, 2 front and full rear seat, patched tear on passenger seat, mounted on manual sliders- $125

OBA setup, includes 3gal tank, manifold, a/c compressor and all the lines, very well setup, the tank and manifold mount in the rear cargo area, air line and chuck for tires included, fills all 4 35's in a matter of minutes and will run a 1/2" snapon air gun to take off pinion nuts with ease!- $200

4 KC Daylighters, 2 backup lights, 100w on the daylighters, 55w on the reverse lights, decent shape, one of the daylighters needs a bulb. Includes plastic covers and KC soft covers- $125

JKS trackbar, the home brew one, NEVER driven on, will be sanded and painted before sale; has rebuildable ball joints and comes with RE track bar bracket- $150

Home brew hand throttle -$50

60" Highlift jack, needs some lube but still good working order -$50

3 stock front driveshafts, 2 with rebuilt cardans, $35 each

Tan center console, comes with painted black bracket on pass. side for GPS mount- $30

Tan lighted visors- $30

ZJ shift knob- $10

HD battery shutoff switch, Painted bracket, mounts right behind battery, all cables included VERY HEAVY DUTY, 230amp switch- $80

OEM steering box, good shape, no leaks- $50

Durango HD steering box, good shape no leaks- $65

Inline 6 coil pack, good shape- $60

6 Spidertrax 1.25" wheel spacers, $75 per 2 spacer

Trailhead Tire Deflator set, comes with 4 deflators, allen key, PSI gauge, manual and quick reference sheet for tire psi's, 5-20psi range adjustability, used 3 times. $50

Most interior panels, mirrors, interior lights, outside front end lights available, pm for pricing...
 
can i get some photos of the trackbar setup and the hand throttle?

what size is the flex joint on the trackbar, how much lift were you running/how much adjustability did you fab it for?
 
Compressor is the stock compressor, OBA setup sold but the compressor is available.

The trackbar was used with a 5.5" lift. It will fit 4.5-6.5 lifts, and its built to be used with a raised trackbar mount.
 
**Updated List***

First gen. Wilderness Roof rack, includes highlift mount, spare tire mount, rack for shovel/axe and the eyehooks on the front for the 4 spotlights, crossbar on rear drilled for 2 backup lights- $250

tan leather seat from older xj, really good shape, 2 front and full rear seat, patched tear on passenger seat, mounted on manual sliders- $125

4 KC Daylighters, 2 backup lights, 100w on the daylighters, 55w on the reverse lights, decent shape, one of the daylighters needs a bulb. Includes plastic covers and KC soft covers- $125

JKS trackbar, the home brew one, NEVER driven on, will be sanded and painted before sale; has rebuildable ball joints and comes with RE track bar bracket- $150

Home brew hand throttle -$50

60" Highlift jack, needs some lube but still good working order -$50

Tan center console, comes with painted black bracket on pass. side for GPS mount- $30

Tan lighted visors- $30

ZJ shift knob- $10

HD battery shutoff switch, Painted bracket, mounts right behind battery, all cables included VERY HEAVY DUTY, 230amp switch- $80

OEM steering box, good shape, no leaks- $50

Durango HD steering box, good shape no leaks- $65

Inline 6 coil pack, good shape- $60

6 Spidertrax 1.25" wheel spacers, $55 per 2 spacer

Trailhead Tire Deflator set, comes with 4 deflators, allen key, PSI gauge, manual and quick reference sheet for tire psi's, 5-20psi range adjustability, used 3 times. $50

Most interior panels, mirrors, interior lights, outside front end lights available, pm for pricing...
 
can i get some photos of the trackbar setup and the hand throttle?

what size is the flex joint on the trackbar, how much lift were you running/how much adjustability did you fab it for?

bump
 
it will work for 4-6.5" lifts on a raised trackbar mount. It has a 1.5" flex joint, it will fit a stock-width mount on the axle, and comes with a modified RE bracket at the frame side. I will PM you some pics this weekend, sry I didnt see this earlier!
 
Back
Top