Rebuilt Ford 9" and Dana 44 with 8" Ram Assist, Stock 3.5 Gears, Open (no lockers) - 79 has cast C's. These axles were mounted but never run.
These things were soda blasted and then sat without paint, still pretty clean but need paint.
New Bearings, Seals, Hubs (Warn), Calipers, Wheel Cylinders, Rotors, Bolt On D44 diff guard, weld on 9" guard, etc... For mounting the axles it includes Radius Arms, 6* bushings, coil mounts and drop brackets (that have to be ground clean where they were mounted on my unibody).
Also includes heim joint steering, drilled and tapped XJ steering box, Rusty's steering box brace and 8" stroke ram with lines.
To be mounted on an XJ you need to bolt up the 9", weld on the drop brackets, hook up the steering to your pump, hook up brakelines, figure out the driveshafts and go.
Located near Clover, SC - 15 min. south of Charlotte, NC
PM for pics
$750 OBO
These things were soda blasted and then sat without paint, still pretty clean but need paint.
New Bearings, Seals, Hubs (Warn), Calipers, Wheel Cylinders, Rotors, Bolt On D44 diff guard, weld on 9" guard, etc... For mounting the axles it includes Radius Arms, 6* bushings, coil mounts and drop brackets (that have to be ground clean where they were mounted on my unibody).
Also includes heim joint steering, drilled and tapped XJ steering box, Rusty's steering box brace and 8" stroke ram with lines.
To be mounted on an XJ you need to bolt up the 9", weld on the drop brackets, hook up the steering to your pump, hook up brakelines, figure out the driveshafts and go.
Located near Clover, SC - 15 min. south of Charlotte, NC
PM for pics
$750 OBO