Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Sorry.
I'm wondering with the bend in the main arm if I shortened it, if it would increase my caster. My background is in programming and somehow I never learned trig and figuring out the geometry of these arms is beyond me.
The cutting and welding would be done on the short upper arm. I can...
https://www.roughcountry.com/jeep-xj-long-arm-upgrade-kit.html
It's that kit with Rubicon express 5.5 coils. I measure my caster from ball joint to ball joint with a piece of metal and an angle finder. I had my buddy at NTB measure it and got the same reading. Took it to a frame shop and got...
5.5" front springs with rc radius arms. Just replaced the upper bushings because they were bad.
hp30 swap on my 2000. I pulled the uppers all the way in and didn't really gain any caster (2 on drivers 1.9 on passenger, swear that's what I measured from the same spot pre shortening the uppers)...
I'll try setting the distributor again. Last time I did one it took 2 tries.
I did TDS on compression stroke, 11 o'clock on oil pump, distro in at 1 o'clock to where it came down right on the bolt hole with the rotor pointing 5 o'clock at cylinder 1.
But like I said I've had to do it multiple...
I pulled the pan to change the oil pump, rms, and have a look around.
After priming the pump (coil disconnected), I no longer get spark. It's not flooded and has been down for a week.
I did accidentally move the oil pump drive a bit when installing the pump.
Troubleshooting:
- Checked Grounds...