• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Search results

  1. V

    Temp gauge reading low

    I think my temp sensor is going south, but I wanted to see else it could be. I was driving home from work the other day and the temp outside was about 35*. I was sitting in traffic and my temp gauge went down to 2 ticks below 210. It usually sits about half way between 210 and the tick below it...
  2. V

    Unsettling front left side

    99XJ Sport, 4.5", 31s, NP231. As I'm driving if I run over something with my front left wheel at speed (45 MPH or higher) I get an "unsettled" feeling in the front end. It doesn't feel like a wobble, but I could be mistaken. It doesn't happen on the right side, just the left. If I had to pin a...
  3. V

    Bought a boat, now what?

    99 Sport, 5.5" lift, 31", aw4, 3.55 So I bought a boat and am towing it around. I know my XJ is under geared (should be 4.10 for 31", thinking 4.56 so I can throw 33's under it). If I tow the boat for a while the temp starts to spike. Everything in the cooling system is stock. Thoughts on items...
  4. V

    Airbag light

    So the airbag light on my 99 XJ sport is coming on periodically. It doesn't happen often but it does happen. I've done tons of reading and have read that this is typically the clockspring. Now I'm not just going to start changing parts, but everything I've read points directly at the spring. So...
  5. V

    Driver's door window issues

    I recently pulled my driver's door window switch apart to fix the broken solders for the lock window switch. After I put it all back together it worked perfectly for about an hour. The issue I had prior to fixing the switch was the Windows would only work from the driver door switch. After...
  6. V

    Front flexible brake lines

    So I'm trying to replace the front brake lines on my 99 XJ (non ABS). The hard line does not want to release from the flexible tube. I'm afraid of rounding out the nut. Does anyone have any suggestions on a good way to get these flexible tubes off the hard lines?
Back
Top