Search results

So my super flex bushing frame side is shot....anyone have a part number to delete the superflex bushing for a regular rubber or poly bushing? On the same topic how much articulation does having that spherical superflex provide over regular solid rubber or poly?

89 xj 4.0 stick shift. I have an intermittent problem it seems like it has cropped up since the weather has been in the 90s here. Sometimes when I start the engine and go to Revit it will only go to 1000 RPM then it starts to spit and sputter. Then after about 20 or 30 seconds of pushing on the...

I was watching vids of the toyota terrain view camera system and thought it was pretty cool. Ive often thought about doing something like this probably even before toyota made it a feature. With cameras being cheaper than ever im getting closer to making it a reality especially since you can...

im putting a knock sensor on my 89 xj and have searched high or low for the torque spec. Anyone know?

Ive been poking around the internet for an hour and cant find a site that will give me other vehicles that use the common gm style map sensor that my 89 cherokee does. The reason being is im trying to get a couple at the junkyard but cherokees are hard to find now in my area. So can someone...

Renix 4.0 I was out in the garage messing around with my engine scanner and noticed something strange. With engine off key on i was watching the tps signal while i was pushing the gas pedal. At the same time i had the o2 circuit pulled up on split screen and noticed that when i pushed the gas...

Does anyone have one laying around or know where i can get one for my 89 xj 4.0 ax15 trans.Searced the yards around here and cant locate one.

Does anyone have one laying around or know where i can get one for my 89 xj 4.0 ax15 trans.Searced the yards around here and cant locate one.

Throw me some symptoms please. Can it cause notchy shifting under load?

So im on the market for a new radiator becuase mines leaking. Need to know some good options as i dont want to just go to the parts store and buy some junk that will fail in a few months. Do they still make all metal radiators? The plastic tank crap makes me nervous but if some of those can be...

this is my ad. columbus.craigslist.org/tls/d/yukon-gear-clamshell-bearing/6657946519.html

high pinion dana 30. ill be posting pics of patterns in this thread when i get that far for critique but first i have a question. I dont have a housing spreader.When i get to final assembly after i get the right backlash how many shims do i need to add to both sides for carrier preload and...

before i buy this was wondering if anyone here has anything bad to say about the seller or the puller...

can anyone recommend a good shop to setup gears in a dana 30?

.... How many amps are the empty auxilliary spots rated for at the very top of the box? 89 xj manual trans 4.0

My short term and long term trims are up a bit and I suspect a vacuum leak so im trying to troubleshoot. While researching fuel trims I came across an industry professional that made this statement: On engines that use a manifold absolute pressure (MAP) sensor to determine airflow, a vacuum leak...

97 GC laredo 4.0 When i set cruise it very slowly creeps up in speed and next thing i know im doing 5mph faster than set speed.....and will keep going if i let it eventually i have to hit the cancel or decel button Where should i start looking?

I got a set of dana 30 shafts that i put new spicer 5-760 x joints in last weekend....never installed shafts...They were the wrong shafts for my 89..they wouldnt work with my hubs. $80(joints alone were $50)...just trying to recoup some $$ for the other set of shafts i had to buy and joints i...

Are there any different yokes that either came on or can be used on the front output of the 231 case? I got a drive shaft thats about a half inch too long and im looking for little tweakes to make the shaft work. Heres a pic of mine (notice how far the yoke sticks out) Was wondering if i can...

Pulled a front shaft from the yard and it measures 31.50 full compress from joint center to joint center While my output to output measurement is 31.50. Gonna cut a half inch from the end of the slip splines..will this give me ample travel before the yoke bottoms?