Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
2 sets of 4 available, 8 total. 3 are in great shape, 5 have varying levels of oxidation under the clear coat.
Located in Natick MA. Will be moving tomorrow.. if you want them speak up, make an offer. Would hate to scrap them.
Had a 2wd axle tube I took apart to use as a mock up axle for my WJ knuckle swap. It has the pre-92 spindle design, with rebuildable bearings and one piece rotor/hub. Has the rotor, brake calipers, caliper brackets, knuckle, basically just took the entire thing off the ball joints. Free if...
I guess they changed it 98-00 but it's worth it to come take a look. Even if it's off a bit it's definitely better than getting something like red or white. I'll PM you for details.
Moss should be the darker green, emerald was the more tealish green. I'll grab the paint code off the door when I go outside. It's "PJN Moss Green Pearl Coat"
Def interested in the fenders and header then. The hood really only has a small corner mark, so its not necessary.
XJ got hit on the Mass Pike and insurance totaled it. No internal damage so just looking for some body parts if anyone has any available.
97+
Need:
Header Panel
Driver Side Fender
Would also probably buy if all together:
Passenger Side Fender
Hood
Ideally Moss Green but all colors are an...
My sisters XJ has some motor issues that I'm not even going to dig into. Head or cracked block, something serious enough the motor is shot for good. Oil/Coolant mixed. Loud bang. Anyway, going to scrap this thing soon.
Clean title, 99 4.0 AW4 231 with 125k ish miles. Body is rusted apart...
I bought a new Bosch and it caused me to have a stutter/stall when pulling out of parking lots etc. Installed NTK and no problems at all. I only use NTK now.
Look up Cherokee "blend door" or "vent diverter: issues. The plastic tabs on the doors snap off and get stuck, or slam closed when you turn the heater on full speed. Since you said it blows hot from the vents, I'd say its not your hot/cold door but the door that diverts air to the defroster.
If...
It's not so much that it dissolves the glue but the friction lining absorbs the water, which makes them expand and separate from the metal bands. The glue is not made to hold them in this manner. Also, it would be very naive to think there is no such thing as a water soluble glue. Compounds are...
I wouldn't bother. The water will dissolve the band glue, they'll crumble apart, and any rust or corrosion will clog the minuscule passages in the valve body. There's a reason the inside of a trans looks so immaculately clean even after 300k miles - never any water to cause damage.
Edit- From...
If this is the first time you're taking the injectors out, I highly recommend the extra work of taking the intake manifold off to do the swap. It's more work, yes. Some extra bolts, and a new gasket for the intake/exhaust manifold. However while you may be able to get the loose stuff around the...
Anyone have a 2wd front tube around they want to get rid of? Doesn't need to have knuckles or anything else. Want to mock up WJ knuckle swap in my garage over the winter and figured that would be the easiest way.
Boston Area or Central NJ, or along the road between the two.