Search results

-SOLVED- went back through everything, with 5v volts everywhere. took the ground off where the battery NEG goes to the body and wired wheeled it to metal for better connection. Did the same for the engine to firewall and BAM no bus is gone. Runs, drives and is now looking at other ways to piss...

Thanks for all that gave advice.

-SOLVED- went back through everything, with 5v volts everywhere. took the ground off where the battery NEG goes to the body and wired wheeled it to metal for better connection. Did the same for the engine to firewall and BAM no bus is gone. Runs, drives and is now looking at other ways to piss...

Blakews no major work done. Just drive it back from Wisconsin, 3 days later this issue. Luckily it didn't happen in the trip, if there is a bright side to this.

Sailorjim86 I did look at at and it still looks normal with no extreme corrosion but for such a simple fix is probably worth an upgrade

Tripped, the two I did check had 5v. I am not sure which ones to check but I'll do a more through investigation. And if necessary I'll check the pcm as you suggest.

My apologies, it is a 2001 Cherokee Sport auto trans 4x4. I have removed the cluster twice now. (Dash is still apart) I've cleaned the connections and used dielectric grease but what you're saying is the cluster itself could be bad. Didn't think of that but maybe next weekend I'll make a to to...

I'll try that

Sorry 2001 Jeep Cherokee sport 4.0

I have a no bus, no start issue. I have searched the internet watched the videos and searched here in . Pulled the speedo cluster first, no dice. Then checked ohms on the CPS. They seemed good but I bought a genuine part anyway just to have a spare. Cleaned all the connections on the computer...

So I have a no bus, no start issue. I have searched the internet watched the videos and searched here in NAXJA. Pulled the speedo cluster first, no dice. Then checked ohms on the CPS. They seemed good but I bought a genuine part anyway just to have a spare. Cleaned all the connections on the...

Took the stock receiver off my Cherokee. come get it if you need it. Located in Firestone but I work in Loveland so either place is fine. Joe 303-507-0682 text is also fine. similar to the one below

minus one front fender cutting and a couple "sticky" bolts he did it all. He even saved up and bought the lift and wheels. I bought the tires as a deal if he saved. Proud of the little guy. Gets his regular licence next week. Bumpers are next!

Just finished with the kids lift. 3" rough country with bushwacker flatties and 275/65R17 BFG AT's https://goo.gl/photos/xfrKT6UDFn3QgB3w5 Sorry for the link, GOOGLE does not support phbb photo sharing. (hoping that they are listening!)

I use http://www.dndmetal.com/ in Broomfield. Great prices and good service.

Sat morning 8 o'clock-ish sounds good. Just PM me your address and I will be there.

I can also help out if needed. just say the time and I'll be there.

Resonator

Bump so tempting but I am looking for an XJ