Search results

I will be doing a brief write up of spectre's cowl intake for 97-01 XJ's showing pictures of the install. I was lucky enough to receive one of these for evaluation in exchange for an honest review. I have no affiliation with the company and was not paid for my opinions. That being said, here...

Working on a 2003 GC 4.0 with a single electric cooling fan, no additional condenser fan. Checked all fuses, wiring and has a new relay and a new fan motor and assembly, yet the fan will still not come on with the a/c or when it gets hot. I've let it get to over 230*F and it still doesn't come...

I have a 98 with a NP231 with ~85000 miles and want to either trade for, or buy a NP242 (prefer out of a later model). Let me know what ya got! I would also need all the linkage, bezel, etc. --Jon

Ok, so I've been thinking about doing the FF dynamics radiator and 3 fan setup, but I came across this and thought it may be good too. Says it does 2200+ cfm as compared to the 3300 on the FF dynamics. Is 2200 still sufficient? I do not do a lot of heavy towing with this Jeep. Also, if the one...

Ok, I have searched but maybe I'm just not looking hard enough. At any rate, I am in the market for a new distributor (cardone reman at AutoZone to be exact). Everyone I've come across says the same thing: "without module"....what exactly does this mean? Are they referring to the cam sensor...

I've developed a slight squeak at idle and have found that my fan clutch has some play in it (bearing going out). To make matters worse, I also recently found a VERY small radiator leak (overflow bottle goes from full to add about every 5000 miles) and yes, I have verified it is actually a leak...

Ok I know one is a long arm, the other is short arm. Both would get the Bilstein 5100 shocks at all 4 corners. About the same in price after adding shocks to both kits. Here's what I'm looking for.... I use my rig as a DD. I will be replacing the 3" procrap lift that it came with when I got it...

Ok, so when I bought my Jeep, the guy told me it had a factory tow hitch...awesome right?.....WRONG!!! Come to find out it is a Uhaul hitch, AND wiring kit. Luckily, it seems as though whoever installed it, actually did it right. Must not have been done by Uhaul! Anyways, I am debating on...

Ok, so I just bought a set of heated mirrors to replace my stockers on my 98. I know it's just a direct swap, but my question is in regards to removing the old mirror. It looks like there is a separate plastic molding that you can remove JUST that piece in order to access the nuts that hold the...

Anybody have any experience with them personally? I am thinking of getting 2 of their digital gauges, (oil temp, trans temp). They seem like they're pretty good but they're 1/3 the cost of the auto meter digital gauges. This is one I am looking at specifically...

I had some vibes with full throttle from 30-35 and after 65 on the hwy. I did the IRO SYE today, and eliminated the T-case drop. Now, I still have the same vibes, plus some that feel even worse at about 50-60 and sometimes under hard acceleration it feels like something is thumping the bottom of...

I just bought this: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160414123372&ssPageName=STRK:MEWNX:IT#ht_500wt_1182 Before I do the install, I'm going to wait until I get an APN header and do it all at the same time. Before I do this, is there ANYTHING else I will need to...

I am looking to buy the disc brake backing plates off said named years liberty, preferably complete and assembled.

Ok, so I've searched around and read about the AFE stage 2 intake, as well as the S&B intake...but I have not seen a comparison between the 2. I like both and think both would function well, however the question remains in my mind, which of these 2 is the better one? Why?

http://cgi.ebay.com/ebaymotors/JEEP-CHEROKEE-XJ-ALUMINUM-RADIATOR-W-COOLING-FANS-MPG_W0QQcmdZViewItemQQhashZitem19b7e1bf15QQitemZ110459207445QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1653wt_1165

I just got these as a gift for my 98 XJ. http://www.quadratec.com/products/97036_00.htm I was wondering, on my last 99 XJ I had a cheap set from Walmart and just wired them directly into my reverse circuit without using a relay or anything. Would it be ok to do the same with these new ones...

Ok I have searched but most of what I have found pertains to older XJ's.....so here is my question. The Jeep I'm about to get is a 98 4.0 aw4 with a 3" lift and 231 T-case....the guy that owns it said he took it to a driveline shop and they said the angles were ok, but they needed to lengthen...

I am getting another XJ (98 4.0 AW4, 75k ORG. MILES!!!) Since my other one (99 4.0 AX15, 118k miles) was totaled. On my other one, I was running the Rock-It intake by turbo city and the Poweraid throttle body spacer by airaid. With that combo, my hood BARELY cleared!!!!! In fact, when I first...

Ok, so yesterday on my way into work, some idiot in a tractor trailer with a flat bed loaded full of steal beams, thought it would be a good idea to turn right in front of me from the MEDIAN!!! Apparently he didn't see me or whatever the case was, but as you can tell, I tried to stop....just was...

FINALLY!!!!!!! I got them! I work at a tire and auto repair shop (to remain nameless) as a Service Manager and one of my customers wanting to buy oil change gift certificates happened to have a wrangler X that the previous owner had put a full set of 5 MOAB's on. Well, you know they saying, "it...