Search results

Brand new, never used. $180 OBO Does not include 2x6 tube. https://www.hooliganoffroad.com/collections/xj/products/xj-2x6-rocker-replacement-kit Located in Houston.

Not out of the Jeep yet, but figured I'd post it here to see if anyone needs one. NP231 out of my 01 XJ. 155k on it. Has a PORC SYE installed. Case leaks a bit, probably because I suck at re-sealing with RTV. Have a new output seal that will go with it. $300. Local pickup preferred...

For an XJ with 3.5-4.5" lift. About 6 years old, still work great, no leaks, couple little boot tears $80 for the pair.

This is the 275/78 valving 7100 short body that was highly recommended around NAXJA for the front end of the XJ. Ordered a pair 2 months ago via 4WP, was told they're custom gotta wait, should be in mid August. Called today for an update and was told they've been discontinued. Nice of them...

If anyone has knuckles brakes etc let me know.

Adjustable uppers and lowers, removed for Long Arm swap. Part #'s: RE3780 (Upper) RE3715 (Lower) Used, but work fine. Uppers were drilled for a 1/2 bolt on the axle end to work with the bushings on my truss. $150 for all 4. Would prefer not to split but willing to entertain offers...

Pulled them off, since my rockers are damaged anyways I think I’m gonna cut. Good condition just need paint, includes hardware $300obo pickup in Houston. Can deliver to DFW 4th of July weekend.

Come pick it up. Just need it out of my garage. Crossmember with welded on transferee case skid. It’s taken some hits but still works Trans mount. Believe it works on aw4 and ax15/nv3550. Used about 2 years Extended rear bump stops. Used about 2 years still good Rustys air tube. Keeping the...

I’m in the middle of a tupy swap on my 01 xj. Head is a rebuilt from Windy City cylinder heads Finally got the head on and torqued down today, then started installing the pushrods and rockers Had an issue with one of the bolts for the rockers. Followed the fsm procedure of alternating back...

$30. Pickup in Houston Tx. I could ship if you wanted to pay for shipping. Filter was bought in Moab and has about 1500 miles on it from the drive back. Switching to a THOR cowl intake.

The first bolt Banks wants you to tighten is on the lower side of the manifolds and the header tube blocks me from getting anything on there other than an open ended wrench. Any thoughts on how I torque this to spec? I’m using the boostwerks studs, wondering if going back to the factory bolt on...

01 XJ 160k miles Only symptom: coolant loss Oil pressure normal, no milkshake. No white smoke from exhaust Had Blackstone labs run an oil analysis, here’s what they said: You were looking for coolant, and you found it. Potassium and sodium show a pretty big leak. Silicon might also be from...

Couple items that came off my rig recently, free to good home, come pick them up 1. 2 pair of Corbeau single locking sliders. Upgraded to dual locking. 2. Up Country extended rear bump stops. Put on longer ones. Still all there and relatively undamaged. Pickup in West Houston.

Anyone know a source for quarter window seals for a 2 door?

Upgraded to some JL Rubis with bigger tires since I didn't like the idea of my daily having bigger tires than my wheeling rig. Set of 5 JK Rubicon Wheels with 255/75/17 BFG Muds. Good shape, only around 5k or so on the tires. Plenty of tread left. 5x5 pattern, will fit an XJ with adapters...

Any of y’all ever wheeled Wolf Caves before? Looking at heading there for New Years with one of the Houston clubs

01 2 door XJ. My power door locks switch won't work to lock the doors, but it will work to unlock the doors. I replaced the passenger side master switch a couple years ago when they wouldn't work in either direction. Is this still a switch issue or is it more likely wiring?

They're a bit saggy, but still better than nothing. Probably 3" lift these days, maybe more without a rear tire carrier. Needs new center pins, one broke, the other is S Shaped. Pick up in West Houston, 77063. Going out for bulk trash pickup on April 5th if nobody wants them.

Finish the Deaver spring install Finish the fender flares on the right side Adjust my front control arms to improve caster and ride height (springs bowing currently) Maybe add a spacer up front to match where the deavers end up Taking off Friday to finish the Deaver project since I had to work...

Post up in here if you've got any items to sell that you're planning to bring.