Search results

I have a 99 xj sport, 4.0 aw4/231. All stock truck. About a year ago my CEL came on, my obdII scanner was telling me the CEL light should be on, but it had no codes. another lesser cheap obdII scanner told me the same thing. i had a shop check it, they said it was reading a code for the evap...

does anyone know if the factory window tint can be removed? i am doing a bunch of cutting inside my truck and it seems like the metal sparks have melted specs of the window tint on all my windows. im pretty pissed, and not totally sure thats what has happened but thats what it seems like...

I am currently in the process of removing the abs system from my 96 xj. I have got the front axle squared away but am having some questions about the rear. What is the difference between the wheel cylinders for the ABS and non-ABS dana 35? Any info will be great.

I have been researching stock leaf spring replacements for a few weeks now. I have found several listed by crown at Morris 4x4 as well as Quadratec. I also have found several threads that give open spring arch as well as a pound rating but this does not help in knowing how the jeep sits with...

I have recently got the 4.0 from my 97 xj running after three years. It is basically a stock rebuild. I am having a nasty lifter tick that is not going away. I ran some seafoam through the crank case with no luck in getting the lifter un-stuck. I really do not want to ruin a complete rebuild...

It been too long. Started ripping this thing apart about 4 years ago, between school, being broke, and daily driven cars that needed work to, this thing is finally starting to get back together. First day of dis-assembly, about 4 years ago. Motor starting to be assembled, basically a stock...

Came across a bunch of lift shackle measurements, but none for the JKS 1" lift. Does anybody have these, or know what the eye center to eye center is for the jks 1" lift boomerang shackles? im attempting to find a shackle thats more than 5" but less than 6", and am not having much luck, if...

does anyone know what the stock belt driven fan on the 4.0 pulls cfm wise at idle? how about the electric one from the 97+ models? thanks

Hello, In a 96xj does the pedal assembly need to be changed to non-abs when doing a full brake abs removal? Or can that remain the same with all other parts needed changed over? thanks, new to this year xj so dont know much about them.

heres the deal, long yes, but any help is appreciated. I have a 97 xj block that I have done a rebuild on. I am finally reaching the point of getting the truck back together and getting it started. The cam that came out of the 97 block was trashed due to wear, so my choice was after market or...

I have a pair of Rubicon Express front lower control arms for xj/tj/mj/zj. They are fixed length, with flex joint on one end. Were on my xj for about 3 years. They came with rubicon express's 3.5 inch flex lift. Joints move smooth, I just greased them up. (tough with your fingers but with a...

xj lift shackles 1.5" tera flex $45.00 $45 plus shipping great shape, dirty yes. used for a bout a year on my xj. have greasable bushings. contact me here or email me at [email protected] Thanks, Ryan

A simple question yes, I have searched but 'I' am unable to find the answer. Frame plating has made my frame end trac bar studs to short to serve the HD trac bar bracket I have. Can these just be knocked out? They do wiggle a little bit but do not want to f up the sheet metal on the inner...

i just re-aquired my old 89 xj back from my father. been doing some work on it, and would like to know what springs i have in the rear. it seems to be lifted maybe an inch or so over the average xj. they are 4 leaves, all leaf ends are identical, other than main leaf of course, single wrap...

Looking to replace the window regulators on my 89 2door. Are they the same as a 4door model's? on my part search I have not come across different part numbers for each. any input will help :)

posting for a friend, in North Hollywood Contact: Keith Walker Call: 732-841-0511 $$ 4900 2001 pontiac aztek 76000 miles 6cyl auto 20/27 mpg no problems ***PICS***...

has anyone had any experience with any of these? i really have my eye on the drilled powerstops, or the drilled and slotted summit branded ones. http://summitracing.com/search/Department/Brake-Systems/Part-Type/Brake-Rotors/Year/1997/Make/JEEP/Model/CHEROKEE/Drivetrain/4WD/?Ns=Rank|Asc came...

looking for fitting size for trans fluid lines in the aw4, in and out. any info will help. thanks

finally got the alternator mounted. its a 97 4.0 much thanks to my brother for fabricating/welding. it worked out great, i was able to use the original ac comp. bracket as a base along with some of the orignal mounting holes. the upright piece is bolted through an original hole into the block...

i am finally starting to make some progress on installing my rebuilt 4.0 its a 97. i finally got my battery relocated, the computer moved and my new airbox mounted today. just thought i would share withyou all what i have been working on its a 00'tj air-intake. i put this box in so i can...