Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Yes. The leak is coming from between the splines. I dont see any need for there to be fluid back there so a sealed bearing would work. I have read threads where it was mentioned but no follow up as to whether or not it was done or a part number.
Thanks,
Dave
Hi all,
I am leaking atf from the end of the output shaft even after cleaning it up and sealing it with rtv. I would like to place a sealed bearing in place of the open output shaft bearing.
After all of the searching I was wondering if anyone has done this and has the part number of the...
Is there any way to trick that sensor into thinking that its hot to see if I can get the A/C to work without the jumper? I dont want to buy the sensor if it really is something worse. Thanks again.
Ok sorry I must have skipped that part. Now we are talking about the sensor in the thermostat housing right? If it is I guess ill go try to pick one up and see if that fixes it. Thanks again for your help.
Ok so I got the codes.
Air Switch Solenoid circuit
A/C Clutch Relay
Coolent Sensor
Now I know the Relay is good. I jumped across the coolent sensor wires and the aux fan didn't come on. I have no idea what the Air Switch Solenoid is?? I am thinking the guy might be right about the fuse...
Both my A/C and cruise control stopped working at the same time. No fuses were blown and the relay is working. About 4 hours later the maintenance required light comes on. I went and talked to a guy at a shop and he told me it is most likely the fuse block and that I could jump across the...
I have an 8.8 with discs and the axle is not hub centric. Searched the topic but there is no mention of it. Has anyone else run into this and if so what did you do to fix it?
Thanks,
Dave
I know i had called them today looking for either of the two and they said they didnt have um. I will call again though. I was going to try pheonix hopefully someone will be open tomorrow so I can go pick one up. The gears dont really matter but it would be nice to find a 4.10 then i would...
I have the d35 in the rear and was looking for a d44 or 29 8.25 but cant get either in my area. So what other options do I have? I have heard a lot about 8.8 out of explorers. I can do any fabing I just need some advice.
Thanks,
Dave
The forward bolt's nut has broken loose inside the frame. I cut a square out of the bottom of the bracket to get a wrench on it now the nut is stripped out. What should I do now??
TIA,
Dave
The forward bolt's nut has broken loose inside the frame. I cut a square out of the bottom of the bracket to get a wrench on it now the nut is stripped out. What should I do now??
TIA,
Dave