Recent content by wcbuyer

Were you able to solve this problem? If so what was the solution? Thanks

Finished up the replacement tonight and it seems to run and idle better then before. sjkimmel99 thanks for the link - I had read that before I posted but I did refer back to it during the install. I had to trim the bottom of the intake on the #6 cylinder for clearance and I also got the felpro...

Should I also change the 0-ring on the fuel line? Thanks

It is time to replace my cracked exhaust manifold on my '99 XJ, 4.0, auto. 4x4. I have an APN on order and this is going to be next weekends (hopefully only 1 day) project. Are there any tips or secrets other then remove and replace per the FSM? I will spray PB Blaster on the nuts and bolts...

My '99 starting making a noise under load when warm. Turns out my exhaust manifold is cracked. Take a shop vac with the hose on exhaust and get someone to hold it on the exhaust pipe and feel around the bottom part of the manifold - just above where it connects to the crimped pipe. I have a...

bump

http://www.steigerperformance.com/

PM sent

PM sent

I have pulled a 5 x 8 U-haul trailer a few times and it was no problem. I have wondered how the larger trailer would pull because the next time I help my daughter move I think we will need the larger one.

Marchel comes to mind with that logo

Anybody btt

Do you think this would do at least as good of a job as the Mopar part: http://store.summitracing.com/partdetail.asp?autofilter=1&part=THE%2D17062&N=700+115&autoview=sku I was planning on doing all 6 injectors. Thanks

What kind of insulating material would be good to wrap the injectors with other then buying the kit from the dealer? I am having this problem and decided that I would wrap all 6 injectors and maybe the fuel rail also instead of just the #3 injector. Thanks

My passanger window went last November and the drivers window went in May