Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
jeez never seen so much excitment over an oil filter I have not had any problems with the fram filters in the past but the filter had nothing to do with my jeeps problem. It had a napa filter on this jeep from the previous owner but the oil was black as night dont have any idea when they changed...
Thanks for the responces, The tps is just fine swaped the one of my 95 xj,i6. I also cleaned and regreased the connections by the oil filter and cleaned the throtle body again this time with it off and with carb cleaner not brake cleaner maybe the brake cleaner killed somthing i doubt it, double...
Ok i have a 1997 4.0 auto 4x4 cherokee , stock, i changed the oil in it being its new to my fleet and upgraded to the bigger filter put in 6.5 quarts of oil the same way ive done in all my 4.0 i6 and started it up . It ran but not right the idel would go up and down 750 to 1000 . then on the...
Dont understand willit help no , It just needs to run normal the jeep there going in currently has no injectors and the ford19# are less exspensive. Could you clarify your responce
Like the title says i just order ford 19# injectors for my 1996 xj 4.0 after reading several post it seemed the way to go untill i came across a flow chart now i think i may have made a mistake. If you have done this swap in a 1996 or have some info pleas let me know here the link for the flow...
No more leaks swapped out all injectors with ones of a doner 96 lots of lube this time. ordering 19# ford injectors for my 1996 the other injectors came out of thanks for the advice:conceited
1993 xj 4.0 auto 4x4,
Fuel was leaking so i replaced the o rings and fixed the leak , Then I dont start it for a day and new leaks when i start it back up the next day so i clean the intake side it was filthy duh i didnt know i had to, ok so after i cleaned all the intake holes i reinstalled...
Im doing a head gasket on my 96 4.0 xj auomatic 4x4.
It a cheap beater i picked up for $600, so i dont want to spend any money for unnecessary things just want it to run good.
Machine shop wants basicly 500 bucks to tank the head magniflux it three angle valve job and deck it .
I can separate...
ok you guys are probaly smarter than me when it come automotive things but from some research ive done on ethenaol , there are plug in devices for your efi to run e85 or 190proof homemade ethenol i saw on some altenergy still building site lots of good imfo on subject, you will need bigger...
well id like to thank everyone turns out the opsu was bad as well which looked like the oring on the adapter was still leaking since its right above the adapter so i got a new one from parts store for 5 bucks no more leak im sure they were both leaking before so its all good now. but now my...