Recent content by Jeep9717

new tires (the others were cupped) and a SYE

Not sure where my "pop" is coming from, but I got rid of my vibes, so I guess I can live with it.

great writeup, looking foreward to seeing them on

x2

Thats puurdy, anyone know the specs?

x2 on riding shotgun. Let your friends break their shit and save yourself some $$.

Sorry I didnt read through the whole discussion (couldnt understand all the grammar), but you did all the work yourself, nicely done. You gonna be able to fit a whole deer in that cargo area? I also would suggest the black wheels and MT's if its strictly a hunting vehicle.

Yep, 2 year old thread revival time. Been checkin on the detours rear tire carrier and havent heard anything for awhile. Anyone know if/when its going to be in production, or is it by special order only?

I ordered a set of tap extractors online so hopefully that works after i heat up the shaft a bit. If not, looks like ill probably have to get a new ouput shaft.

Its your u-joints. My 97 just did the exact same thing. Dedicate at least 2 hours per side if you havent had your hub or anything apart before. Get a 36 mm socket(most auto parts stores will rent for free), hammer and a flat chisel to get the hub off. The axle will just slide out after the...

Ive been looking at getting a new radiator for the reason that alot of my fins are bent and its been getting hotter than usual (around 210-215 but i plan on replacing my AC this summer). Ive heard alot about the GDI 3 core radiator, some good, some bad. Ive also heard some good things on the 2...

I thought i was going to have to but the girlfriend is going to let me use her car to get to work, although i did drive it to the hardware store earlier today and worked like a champ. The way i figure it, as long as the splines on the RE part stays tight on the splines from the output shaft, it...

It broke for a reason....because it was too tight of a fit. There is no way a set of needle nose pliers will work. I think what happened is that i "hacked", drilled and started to tap the hole when the tailshaft was still hot. After taking my time tapping the hole, it started to cool down and...

Im going to the hardware store tomorow for a tap extractor. Hopefully that works.

I wasnt, i was using socket and wrench.