Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
That's not the kit I used -- I modified a high CFM e-fan to fit in the stock shroud, kept the stock e-fan, and wired them to work in tandem thermostatically or by a switch on the dash.
1) Are you sure you have the correct clutch fan CFM data? Seems kinda' high...
2) I had sealed-off all of the...
Dude...
Just start gathering what you need to do the 4.10 swap with locker(s).
I did that on a 5-speed '93 on 31s that I drove all over the back roads of Arizona, southern California,
southern & eastern Nevada, Utah, and even northern Baja as far south as the observatory.
You will be very...
Dude...
Did you watch your mechanic?
Can you tell if the inspection plate has really been off recently?
Either way, it's an easy enough job to do... take a look for yourself... he might have missed it!
Use a big standard screwdriver in the teeth to rotate it. Check ALL of the bolts. Look...
I'm going to get one of these (from summit) and have it on hand for the next XJ project that comes along.
There's no such thing as too much cooling capacity running the southwest, and these are even potentially repairable on the trail.
Here's another vote for the knock being flex plate related.
The sound in your recording from underneath is what I base my opinion on.
Have you listened from underneath with someone else on the throttle yet?
Maybe it's because of the "middle-east equipment group"?
Some of the hard-core PHX area guys swear by this one from Summit Racing...
http://www.summitracing.com/parts/sum-382012/overview/year/1999/make/jeep/model/cherokee
In some ways this one may even be the better way to go. I wouldn't...
Don't sweat this... get one and put it in. I've got one in my '99 and it fits/works great!
------------
Edited to add...
Product Information
RADIATOR. Engine Cooling. .
[NMC-ABD], w/Max. Cooling Alumium, with Heavy Duty Cooling [NMC].
Stock Code 52080104AC ; 3555556335; 52080104AA...
Be sure to use new u-bolts.
30" tires might rub on the lower control arms with stock rims.
If you were lifting your rig another 1.5" you could use JK take-off shocks.
They work well, are fairly plentiful, and can be had for cheap... sometimes even free.
I'm kidding, of course... :rolleyes:
"Comic book logic" would likely dictate someone, perhaps Enid, distracting/drawing them off as he manages to squeeze his way underneath.
I think I'll quit now before I embarrass myself any further... :o