Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
thanks guys for the input. i had a buddy help me with checking the pinion under load while watching it. there wasn't much axle wrap as i thpught. it just needs to be pointed up a few *'s. i was kinda stumped on whether to go with a 2* or 3* shim. i think 3* would put it at just under and...
i have searched this already and come up with conflicting info. i have a 2001 xj with RE 4.5", AA sye, and TW ds. the ds angle shows 21* and pinion is at 17*. after searching the other threads, some say to set pinion angle 1* below to compensate for axle wrap and some say 2* below. which one...
welcome to naxja!
i remember seeing a useful equation for regearing to "stock" feel. i don't remember which mag i got it out of but its pretty useful.
new tire diameter
----------------- X current gear ratio= new ratio
stock tire diameter
hope this gets you in the ball park.....
Thanx again for all the input.
I'll have to check the axle again. just to verify, the vacuum disconnect is on the passenger side by the uca?? i'll have to look for abs tone ring as well....
Hi all,
i have searched this info but not getting all of it....
i have an 01xj and while i'm doing the re 4.5 lift, i can get my hands on a 93 hp30.
after reading the searched threads, i have a few questions. is this a direct swap? are the u joints 260's on the 93 or did they go with the...
That's where I bought my 01XJ. They are all govt leases that are returned so they are relatively low miles and driven like rentals. That auction is fast and furious. Mostly used car dealers show up, but gsa is open to public.
C.
Roverbill,
Right on, I was just up there Sunday. Wouldn't you know it, a big tree had fell across the road just before jeep trail 98 and 107. Worse yet, no saw. So that will be next weekend's project...Let me know when you go up next time
C
Gents,
Thanx for the info. Is there any major changes from 00 to 01 models? If you could send a copy of that CD my way, I'd appreciate it, unless there's some infringement probs....send a pm..Thanx again
C
Anyone know why these manuals don't go to 01?? Found some stuff on ebay but questionable as to reproduction or copy of FSM.
Any help would be appreciated....
C.
Hello all,
I'm just signing in after getting my 01 XJ last Sept. This event sounds great. I hope to get my rig prepped by then.
Anyone done some wheeling up in the Okanogan or Colville Forests? Most places I know are right along the north end between 395 and 97.