Recent content by a_ibrahem

OK guys ,replaced the injectors with ford orange injectors with four wholes in the nozzle its direct fit ,didn't modify anything still not starting first cranck , now pump, filter/valve and injectors are new what else could it be ?

just opened the oil sump and found that shifting solenoids ****ed up ,2 out of 3 is short circuit already and they melt down ,had 2 original in working condition replaced and its shifting fine now before i had changed all 3 solenoids with new ones from amazon because i had one original damaged...

Just checked the oil level before starting , it's near the bent area of the dipstick , after starting it goes between the max and min , it's normal I guess

if cable is lose it will not reverse also right ? Can the tyranny go bad just like that ? It was driving fine just needed to replace the CPS , after replacing it it's not shifting

yes correct

ok disconnected the TCU and still didn't shift manually its locked on a gear and not shifting whatever TCU connected or disconnected from 1-2 to 3 to D up or down NO SHIFTING is this a mechanical issue in the tranny ?

Am not able to get it to shift manually , tried disconnecting the black socket near the oil stick ,tried one green connector passenger side back of gloves box still not shifting at all up or down how to disconnect that TCU and make it shift manually ?

I was not able to disconnect the tcu and shift manually How to do so ? I tried to disconnect the black connector next to dipstick and drive it but still not shifting Looks like it's locked in a gear and not changing up or down Am not sure which gear is it How to test solenoids ?

But I have replaced CPS not TPS

Already done that

How to do so ?

Hello Guys , its confusing me now ,after the jeep died on me and didn't want to start i found the CPS faulty and replaced it then it started now its not shifting to 4th gear ever it stays in 3rd only i haven't got new CPS sensor so replaced it with old one till i get the new one. before that...

Thank you miceanic , i understand what you mean ,will try to see that soon hopefully it's fixed tight today i replaced the CPS and it started right away , have you guys tested these CPS on ebay ?there some cheap ones there do they really work ?

thank you go1lum , have read some articles about the CPS ,all symptoms in my jeep is points to CPS fuel & voltage gauges not moving when key is on position no bus codes no fuel pressure BUT CPS was replaced few month back ,can it fail in just few months ? and as i live in dubai and weather is...

Ok something new happened this Friday , while offloading it was still having the Reverse issue I noticed it's doing this only while climbing up wards On one climb it died and didn't start after We pulled the jeep out , found out no petrol on the rail pump is replaced like 4 month ago , filter...