VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Maybe this is a low pinion D30 vs. high pinion D30 issue? I didn't think at the time that was the limiting factor with mine, but I suppose it's possible...
no. the mounts are identical on HP vs LP.
even with having ONLY the 4 control arms hooked up it may still be difficult to slip the springs out. the stock control arms hit the coil mount and limit droop. this is an issue that aftermarket arms address with either a bend in the tube or offsetting the tube on the joint.
ive never used compressors... there is usually enough room to wiggle a pry bar in there and muscle the coil over the mount and slip it out.