levi11
NAXJA Forum User
- Location
- california
When I was installing my transfer case drop spacers one of the nuts on the inside of the frame came loose. Now what? How the hell can I fix this?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Transfer case cross member bolt help
- Thread starter levi11
- Start date
CaliXJ
NAXJA Forum User
- Location
- Oceanside, CA
Gonna have to cut a little access hole in the cab to get to it. Find a new nut and washer to fit the bolt and tighten it down. Cover and seal with a small piece of metal and RTV, lay carpet over it and move on.
Foothill
NAXJA Forum User
- Location
- Sacramento area
Or weld in a new nut from below. Or maybe one of these "weld washers" from ruffstuff. http://www.ruffstuffspecialties.com/catalog/FIXIT.html
- Location
- San Diego
the weld washer isn't going do anthing.
he has a loose nutsert.
you can grind the bottom of the nutsert off and replace it with a larger one.
