ParadiseXJ
NAXJA Forum User
- Location
- Paradise, CA 95969
I bought a 4 gang switch plate for accessories on the MJ Pioneer. It has wiring for accessies I don't have but there are no switches on the dash. Fogs, O.R. lights, powered outlet, mini compressor etc.
It came with the ground wires hooked up to a single wire, each diving into it's respective 3 prong (they're lighted switches) switch.
My question is: Can I wire the power wires from each of the 4 relays (pin 85) be wired in the same way or do I have to send 1 wire (from the respective relay) to each switch?
AND...can the power wire TO the relays (pin 30) all be on the same wire, wired in a line
It came with the ground wires hooked up to a single wire, each diving into it's respective 3 prong (they're lighted switches) switch.
My question is: Can I wire the power wires from each of the 4 relays (pin 85) be wired in the same way or do I have to send 1 wire (from the respective relay) to each switch?
AND...can the power wire TO the relays (pin 30) all be on the same wire, wired in a line
Last edited: