Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Are the axle shafts the same between the high pinion Dana 30 and low pinion Dana 30 the same? Can they be interchanged without any other modifications?
CAD.... Just want to be sure, you mean Center Axle Disconnect like found in the early XJs and YJs? Anything from any 97+TJ or 97+ XJ should be fine then?
Not quite true. I have an HPD30 from an '86 XJ with 4.10s and a CAD. I am using the full shafts from my '01 in that axle. Search around. People sell bypass kits for the CAD.
There should be a backer plate to close off the connect "hole" and perhaps even a seal that helps guide the longer shaft through the axle tube.
Not quite true. I have an HPD30 from an '86 XJ with 4.10s and a CAD. I am using the full shafts from my '01 in that axle. Search around. People sell bypass kits for the CAD.
There should be a backer plate to close off the connect "hole" and perhaps even a seal that helps guide the longer shaft through the axle tube.