lil_red_wagon
NAXJA Forum User
- Location
- hot springs ar
Im workin on a 93 xj 4.0 AW4 NP233 HP30 C8.25 non ABS.
It came in with a empty rear section of the master cylinder and no brakes.
Long story short i have installed 4 master cylinders(3 new, 1 reman), on the rear wheel cylinders on both sides, shoes, and drums, on the front new calipers ad rotors, also have replaced all metal lines and rubber hoses, also installed new proporsitioning valve, and tried a new booster no diff.
What happens is you can pump to build brakes. let it sit for a few seconds pedal goes to the floor. We have bleed the brakes usein all the methods known. Even used a mityvac on it. I have no air anywhere. Pull 16oz of fluid through eace front wheel and 9oz of fluid through the rears. Brakes hold well when you pump them up. Rear brakes are setup really well.
It came in with a empty rear section of the master cylinder and no brakes.
Long story short i have installed 4 master cylinders(3 new, 1 reman), on the rear wheel cylinders on both sides, shoes, and drums, on the front new calipers ad rotors, also have replaced all metal lines and rubber hoses, also installed new proporsitioning valve, and tried a new booster no diff.
What happens is you can pump to build brakes. let it sit for a few seconds pedal goes to the floor. We have bleed the brakes usein all the methods known. Even used a mityvac on it. I have no air anywhere. Pull 16oz of fluid through eace front wheel and 9oz of fluid through the rears. Brakes hold well when you pump them up. Rear brakes are setup really well.