bmfm64
NAXJA Forum User
- Location
- covington wa
so i'm swapping a 241or for my current 231 in my 99 with 4.0/aw4/231 30front 8.25rear. i've read all the threads i can find about it and still have questions... mainly drivelines. i've read that you can use the stock front driveline as a rear with a sye on your 231. this being said, is it possible with the 241, if you swap the rear output on the case? from what i've read most people swap the front output back to the 1310 so the front driveline still works in the front but the rear seams to be not so clear. is there an advantage of running the rubi rear output and a flange style driveline? if i need to swap the rear flange to a 1310 size wouldn't it make more sense to swap to the 1310 yoke style on the rear instead and use a front driveline for the rear and not have to carry 2 different drivelines as spares and the spares can be sourced from J/Y? and one last question... anyone know if the front and rear outputs are the same size/spline etc? basically will they interchange? thanks