Looking for D30 honed/bored carrier bearings.

mrtosh · Apr 4, 2009

Hey all I'm looking to see if anybody has some already bored/honed out carrier bearings for a D30? Looking to regear and need some that are bored for setting up the shims.

TIA,

Sean

asp · Apr 4, 2009

you'd have better luck posting in your local chapter....

xjtrailrider · Apr 4, 2009

I make my own, just use a "small engine" cylinder hone or a brake cylinder hone. It only takes a few min. per bearing.

Oatmeal · Apr 4, 2009

xjtrailrider said:
I make my own, just use a "small engine" cylinder hone or a brake cylinder hone. It only takes a few min. per bearing.

X2, made a set for my D44

----------Hans

jeeperjohn · Apr 4, 2009

I just buy the cheapest bearings at the local parts house and use those for setup bearings.

CanMan · Apr 4, 2009

jeeperjohn said:
I just buy the cheapest bearings at the local parts house and use those for setup bearings.

Use the old bearings if you can get them off in one piece.

Or cheap ones like already said.

Always good to have laying around.

mrtosh · Apr 5, 2009

Appreciate all the help guys. Ran into a guy on one of the local forums who's gonna let me use his.

jeeperjohn · Apr 5, 2009

I'm fairly certain there is a part # that is already big enough on the inner diameter but I don't have it. Maybe you could ask the parts store folks to see if they can find a bearing that is the same except the inner diameter being about .005" larger.

RCP Phx · Apr 6, 2009

You can also buy ready-made set-up bearings.

Oatmeal · Apr 6, 2009

RCP Phx said:
You can also buy ready-made set-up bearings.

http://www.precisiongear.com/setupkits.htm -------------Hans

Looking for D30 honed/bored carrier bearings.

mrtosh

NAXJA Forum User

asp

NAXJA Forum User

xjtrailrider

NAXJA Forum User

Oatmeal

NAXJA Forum User

jeeperjohn

NAXJA Forum User

CanMan

NAXJA Forum User

mrtosh

NAXJA Forum User

jeeperjohn

NAXJA Forum User

RCP Phx

NAXJA Forum User

Oatmeal

NAXJA Forum User

Similar threads