JabosXJ
NAXJA Forum User
- Location
- Chattanooga Tn
[FONT=Verdana, Helvetica, sans-serif] What is the measurement suppose to be on the front end of a 89 Cherokee.
[/FONT]
[/FONT]
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Alignment ?
- Thread starter JabosXJ
- Start date
Achmed
NAXJA Forum User
- Location
- Southeast US
Put the toe at O*
Follow this: http://www.go.jeep-xj.info/HowtoAlignment.htm
finn188
NAXJA Forum User
- Location
- logandale, NV
Ive personally tried 0, 1/16, 1/8 toe in and my jeep (8" lift 35" tires) does best at 1/8" toed in. Also, I have a couple extra rims (no tires) that I put on to do the alignment. That way your measurements with a tape measure are accurate. I would recomend trying different toe in settings for yourself and tst drive each.
Hudson Bend
NAXJA Forum User
- Location
- Austin, Texas
Existing tire wear on the front end can adversely affect your alignment results also. Go-Jeep's directions are simple and have worked great for me the past couple years. Then I swapped a 98 zj v8 tie rod for the stock one, got new bfg's, and totally eliminated front end vibes following my3.5 inch lift. The beefier zj tie rod makes alignment soooo much easier too...like adjusting your steering wheel easy.
