ready to mud
NAXJA Forum User
- Location
- edson alberta
im going to a ford dana 44 in the front and will be running 38s. what is a good steering box to run that can handle the tires and which knuckles do i need to run high steer.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
steering
- Thread starter ready to mud
- Start date
cox_xj
NAXJA Forum User
- Location
- Bradenton Fl
flat top knuckles
CanMan
NAXJA Forum User
- Location
- Lake Tapps, WA
You can do aftermarket knuckles or find a drivers Chevy knuckle, and another Chevy pass side knuckle and have the holes tapped(and drilled?) and the surface machined flat.
Lots of good info here. http://77cj.littlekeylime.com/web_rs44.html
Look into a Durango steering box. I would also look into running hydro assist. Make sure to plate your frame, with a kit like the C-rok or JKS one. I like the JKS design becasue it welds to the frame. Use grade 8 bolts, and possibly a box brace like MORE's or Crustys.
Lots of good info here. http://77cj.littlekeylime.com/web_rs44.html
Look into a Durango steering box. I would also look into running hydro assist. Make sure to plate your frame, with a kit like the C-rok or JKS one. I like the JKS design becasue it welds to the frame. Use grade 8 bolts, and possibly a box brace like MORE's or Crustys.
