-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
LED TAILLIGHTS
- Thread starter LABMBA87
- Start date
motorcityxj
NAXJA Forum User
- Location
- detroit suburbs
you want the stock lense with a led bulb, or do you want a big rig or bus style surface mount style ?
If you want the replacement bulbs i saw them 1/2 off in the cabelas bargain cave.
http://www.cabelas.com/cabelas/en/t...parentType=index&indexId=cat130004&hasJS=true
If you want the replacement bulbs i saw them 1/2 off in the cabelas bargain cave.
http://www.cabelas.com/cabelas/en/t...parentType=index&indexId=cat130004&hasJS=true
RalphXJ
NAXJA Forum User
- Location
- Columbiana, OH
I made new tail lights and mounted the LEDs in them! Wasn't too hard to do
RalphXJ
NAXJA Forum User
- Location
- Columbiana, OH
I haven't done reverse lights yet, the brake lights are bright enough to light everything up for now!
I didn't seal the box, although I could have, I just sealed the wiring up, the LEDs were already sealed.
I didn't seal the box, although I could have, I just sealed the wiring up, the LEDs were already sealed.
RalphXJ
NAXJA Forum User
- Location
- Columbiana, OH
I made them out of some 3/16 I had laying around.
They were VERY easy to make, I had never welded before, and they took about 3 hours to make. The hardest part was cuting out the hole for the LEDs, I was too cheap to buy a hole saw, so I cut it out with my angle grinder.
They were VERY easy to make, I had never welded before, and they took about 3 hours to make. The hardest part was cuting out the hole for the LEDs, I was too cheap to buy a hole saw, so I cut it out with my angle grinder.
