shaddady34
NAXJA Forum User
- Location
- Maryland
Would i need to disconnect the swaybar for a re4.5" lift to allow axle with enough droop to fit springs or can i leave it attatched. I am not going to install the diconnects
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Swaybar and Lift
- Thread starter shaddady34
- Start date
88xjlover
NAXJA Forum User
- Location
- Marysville, WA
You will have to remove and I don't think it will fit back on there with that lift. My 2" budget lift was too much for the front swaybar on my 89. I just threw it away. Doesn't seem to feel any different than my 91 w/no lift.
WheelinJR
NAXJA Forum User
- Location
- Portland, Oregon
you can mail me the disconnects.
to install the springs yes you will need to disconnect the swaybar, and the shocks, and possibly the drag link.
to install the springs yes you will need to disconnect the swaybar, and the shocks, and possibly the drag link.
256offroad
NAXJA Forum User
- Location
- Huntsville Alabama
and the lower arms...assuming they are gonna bottem out when you drop the axle down...
jeepnuts311
NAXJA Forum User
- Location
- Atlanta, Georgia
RE springs are really stiff. you can run without swaybars if you like. i have the re6130 4.5" and i think it rides better without SB. its too stiff with them
-tim
-tim
