- Location
- Sandy,Oregon
He company I work for is looking for a Dock installer.
http://portland.craigslist.org/mlt/lab/3087691414.html
http://portland.craigslist.org/mlt/lab/3087691414.html
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Job opening
- Thread starter Mnkyboy
- Start date
BPB
NAXJA Forum User
- Location
- Battle Ground, Washington
Thought I'd post one up too. The truck Plant is looking for summer help. dtna.jobs
- Location
- Sandy,Oregon
Just heard today we are looking for another mobile dock installer.
They basically do install and maintenance on warehouse docks and doors.
They basically do install and maintenance on warehouse docks and doors.
- Location
- Sandy,Oregon
We let a shop guy go yesterday and will be looking for another one.
We may also be looking for field techs.
If you have mechanical skills and/or training it might be worth looking into.
Northwest Handling Systems, inc off 181st and airport way.
503-465-9200 you will want to talk to Mike Sheets.
We may also be looking for field techs.
If you have mechanical skills and/or training it might be worth looking into.
Northwest Handling Systems, inc off 181st and airport way.
503-465-9200 you will want to talk to Mike Sheets.
BoringDave
NAXJA Forum User
- Location
- Boring
Their looking for a entry level lube tech where I work. M-F 6-3.30pm half the day off on Fridays some times depending on how much work there is.
http://www.jfschmidt.com/
http://www.jfschmidt.com/
- Location
- WA state
What is the pay like for these positions available?
- Location
- Sandy,Oregon
I think most techs here start around $15 and top out around $25-$30 an hour.
BoringDave
NAXJA Forum User
- Location
- Boring
Heck, I may need to look in to this. Im getting payed peanuts to work on heavy equipment where I am now. But the hours are good and I'm 10min from home.
What are the hours there?
Last edited:
- Location
- Sandy,Oregon
I work 8:00 to 4:30 Monday-Friday
The road guys work Monday-Friday as well but their times vary a little.
The road guys work Monday-Friday as well but their times vary a little.
- Location
- Sandy,Oregon
I also got a notice today that one of our sales coordinators is relocating and they will be looking for one.
Not sure who the contact would be but the number I posted will get the front desk and they should be able to direct you.
Not sure who the contact would be but the number I posted will get the front desk and they should be able to direct you.
XJOLIVE
NAXJA Forum User
- Location
- Vancouver, WA.
the craislist posting doesnt work
- Location
- Sandy,Oregon
The craiglist link is old, I keep resurrecting an old thread and adding stuff as it comes up.
XJOLIVE
NAXJA Forum User
- Location
- Vancouver, WA.
what company do you work for?
- Location
- Sandy,Oregon
98fivespeed
NAXJA Forum User
- Location
- Vancouver, WA
Afternoon Everyone,
We are looking for a few employees too. Meat processing facility in the same neighborhood as Northwest Handling:
Morach Meats
4050 NE 158th
503-252-2480
Need 2 more maintenance mechanics. Have some developed skills or be familiar with a lot of stuff. Dependablitiy is the key. We will train the right person and there is a boat load to learn here. Lots of troubleshooting electrical, lots of stainless fab work, lots of general mundane stuff that we all have to do also. Pay is DOE. Checks never bounce and we are working 60ish hour weeks. Need some overtime?
Ok, back to it...
Thanks,
jb
We are looking for a few employees too. Meat processing facility in the same neighborhood as Northwest Handling:
Morach Meats
4050 NE 158th
503-252-2480
Need 2 more maintenance mechanics. Have some developed skills or be familiar with a lot of stuff. Dependablitiy is the key. We will train the right person and there is a boat load to learn here. Lots of troubleshooting electrical, lots of stainless fab work, lots of general mundane stuff that we all have to do also. Pay is DOE. Checks never bounce and we are working 60ish hour weeks. Need some overtime?
Ok, back to it...
Thanks,
jb
