-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Head Gasket Repair Cost?
- Thread starter d10shun
- Start date
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
You should post this in your region's forum. What a job would cost in NYC, LA, Las Vegas, Salt Lake City won't mean a lot to you in AZ.
Also, what is involved, and the cost, can't be determined until it is torn down for inspection.
Also, what is involved, and the cost, can't be determined until it is torn down for inspection.
old_man
NAXJA Forum User
- Location
- Loveland, Colorado
Figure 4 hours or more. $300 would be cheap.
I just did a HG on an overheated 95. I took the head to the machinist to get a valve job(I provided the ~$20 seals), and shave the head flat($250). The head gasket cost $30(discount from someone on the stroker site). The t-stat $5, the manifold combo-gasket $20, the valve-cover gasket $25, two bottles of coolant-$20. So ~$350 to do the job right and I did all the labor, save for the machining.
