- Location
- Pekin IN/Louisville KY area
Warn Winch 8274 Mounting Plate on eBay
- According to the guys at my local jeep shop, this mounting plate will NOT bolt directly onto any late model Jeeps including the Cherokee.
- It may have been for an older Toyota pickup or for a specific winch bumper.
Use the dimensions below to determine suitability.
- Bolt Pattern to bolt the winch on the front plate is standard: 4 1/2" x 10"
- Front plate overall dimensions: 8" x 19"
- Bolt Pattern for the bottom mounting plate: 3 1/2" x 26"
- bottom mounting plate overall dimensions: 6 3/4" x 27 1/2"
There is a slight bend in one end of the plate that can be clearly seen in the eBay photos. There are some scuffs & scratches that go through the powder coat to bare metal, especially on the bottom of the plate.
- According to the guys at my local jeep shop, this mounting plate will NOT bolt directly onto any late model Jeeps including the Cherokee.
- It may have been for an older Toyota pickup or for a specific winch bumper.
Use the dimensions below to determine suitability.
- Bolt Pattern to bolt the winch on the front plate is standard: 4 1/2" x 10"
- Front plate overall dimensions: 8" x 19"
- Bolt Pattern for the bottom mounting plate: 3 1/2" x 26"
- bottom mounting plate overall dimensions: 6 3/4" x 27 1/2"
There is a slight bend in one end of the plate that can be clearly seen in the eBay photos. There are some scuffs & scratches that go through the powder coat to bare metal, especially on the bottom of the plate.