dirtweazle
NAXJA Forum User
- Location
- So Cal
This is my CL posting, Forgot you guys for about 5 min.
Jeep stroker motor parts. This is not a running engine. Just all the parts I have collected for #2 engine build. If you want to stroker your jeep this is the way to do it (unless you got $2500 for a drop in motor). These are the parts for my second buildup. Already built the first and it is still running strong.
95 Block (still see hone marks on cylinders)
95 head with all valves etc.
95 and 2000 valve cover
95 oil pan
X2 sets of six rods with old pistons (total of 12) 4.0 Was doing a long rod setup
2000 intake
2000 CPS
2000 AC bracket
Idler pully and bracket
Power steering pump and bracket
Crank 4.2 1981-86, 3235477, 4 counterweights, 46lb, 64mm nose
Spacer for v belt use
No machine work has been done and I would advise getting everything checked, cleaned, magnafluxed, decked, honed, journals ground etc. before assembly. Still have some of the main bearings to show normal wear. Also included is a mounting plate for chevy roller rockers (rockers not included) i custom made and can give the details on how to do it. Sweet setup and not cost the $500 of the Yella Terra. Not willing to ship or separate any parts. Again this is not a running motor. As is seen in the pictures. Have more pictures if wanted. Already built one, don't want to build another. Can give you all the info and websites I had when I built mine. All said and done it puts out near 245 HP (45 gain) and 300 TQ (about a +100) If your jeep needs a rebuild anyway this amounts to really only a few bucks more so why not?
Will post pics soon. (Dirty engine porn.)
Jeep stroker motor parts. This is not a running engine. Just all the parts I have collected for #2 engine build. If you want to stroker your jeep this is the way to do it (unless you got $2500 for a drop in motor). These are the parts for my second buildup. Already built the first and it is still running strong.
95 Block (still see hone marks on cylinders)
95 head with all valves etc.
95 and 2000 valve cover
95 oil pan
X2 sets of six rods with old pistons (total of 12) 4.0 Was doing a long rod setup
2000 intake
2000 CPS
2000 AC bracket
Idler pully and bracket
Power steering pump and bracket
Crank 4.2 1981-86, 3235477, 4 counterweights, 46lb, 64mm nose
Spacer for v belt use
No machine work has been done and I would advise getting everything checked, cleaned, magnafluxed, decked, honed, journals ground etc. before assembly. Still have some of the main bearings to show normal wear. Also included is a mounting plate for chevy roller rockers (rockers not included) i custom made and can give the details on how to do it. Sweet setup and not cost the $500 of the Yella Terra. Not willing to ship or separate any parts. Again this is not a running motor. As is seen in the pictures. Have more pictures if wanted. Already built one, don't want to build another. Can give you all the info and websites I had when I built mine. All said and done it puts out near 245 HP (45 gain) and 300 TQ (about a +100) If your jeep needs a rebuild anyway this amounts to really only a few bucks more so why not?
Will post pics soon. (Dirty engine porn.)
