'88 Jeep Cherokee Pioneer, 4.7L Stroker - $4250

[XJoshua]

For Sale: 1988 Jeep Cherokee & 1993 HO 4.7L Stroker - $4250

Pics: http://s39.photobucket.com/albums/e172/XJoshua/88%20Jeep/


1988 Jeep Cherokee Specs:
Clean Title
4.0L w/ 233k miles
Automatic AW-4, Oil Filter Changed 750miles ago
Diff Oil Changed 5,000 miles ago
Converted to 93+ 3-Core Cooling System
AutoZone aftermarket transmission cooler
New balanced driveshaft and rear differential knuckle
Oil filter changed ever 3k miles
Rod knock at startup
1998 Jeep Grand Cherokee Canyon Type Rims with Spare. Tires have plenty of tread left.

Exterior:
Dents here and there, driver fender was smashed in a blonde vs Jeep accident so I bumped it out and pulled off the fender flare. Passenger side fender has a ding from me slipping when pulling off the valve cover.
Paint is faded all over, a wet sand would give it a classic matte color finish.
Rear bumper is hanging on by two bolts

Interior:
Front doors have half the door panel chopped to make way for larger 6x9” speakers that never happened. Three doors are missing the crank handle.
Seats are in great condition minus butt wear and tear on the driver seat.
Small crack on the dash that’s not even noticeable.
Carpet will be steam cleaned soon to remove dirt stains, but it is still the sand color.

1993 HO 4.7L Stroker Specs:
Jeep 4.0L Block and Head
AMC Short Nose 4.2L Crank(4 Counterweights)
AMC 4.2L Beam Polished and balanced rods
Silvolite .060” Pistons, machined to 21.6cc(O Cup, no D Cup)cut .147” deep), and weight matched, with rings
Block Decked .006”
Head Decked .010”
ARP 4.2L Head Bolts
Coyles TruDual Roller Timing Chain and Gears
CompCams part# 68-235-4 w/ lifters
ARP Rod Bolts
Melling HighVolume Oil Pump
Chevy 350 Valves with new guides, springs, retainers, and seals
Homebrew gasket match port and polish
Victor-Reinz Headgasket set

Stroker Bonuses:
99+ Intake Manifold with 99+ Fuel Rail
‘96 Power Steering Pump Engine Bracket
’93 Ford Mustand V8 throttle body
1993 Jeep 4.0L Oil Pan
1993 Jeep 4.0L Valve Cover and gasket
1993 Jeep 4.0L Distributor
Spare 4.0L Valve Springs, Valves, Rockers, Pushrods, lifters, timing chain and gear, and probably more.
Spare SBC 350 Intake/Exhaust Valves
2006 Engine Stand

All Around Bonus Stuff:
Rubicon Express 1.75” Lift Shackles
Spare motor mount brackets
45MPH @ Top w/ Tach Instrument Cluster
Dual Diaphragm brake booster
1998 Jeep Grand Cherokee Hitch
4 9 Slot Steel Rims, and Stock XJ Donut
1 American Eagle White Wall Spare
Youre welcome to pick out any extra Jeep related crap I have laying around.

I started assembling this in June of 2008, and then I got layed off from my job and lost interest in completing this project. Everything is already done, just need a timing chain cover and some washers to lift the rocker arms up a bit. My build it nearly identical to any 4.7L Stroker build around.

I have gotten another job, but its distance doesn’t allow me to keep the Jeep due to gas economy. With me starting school and working fulltime I don’t have the time to finish this. With school and work being on two different parts of town I am currently seeking something on the gas efficient side. I will consider a trade for a:
97+ Subaru Impreza Outback with no more then 125k miles
2002+ KIA Spectra power everything
93+ Toyota Camry Luxury

96+ Toyota Corolla Luxury
Will consider any car offer.


For questions, and offers please call me at 719.369.6910(Sprint)

$4250 or Trade

Thanks,
Joshua

 

[XJoshua]

Price Reduced. Must sell, moving to a place where I cant finish this project.

$4000 negotiable or trade for dependable ride.