Search results

I came across a couple boxes of XJ stuff I no longer want it nor want to deal with selling it. Basically its everything you need to put a manual trans into a 97+ i pulled it from a "you pull it" yard years ago to body swap my rusted 94 into a 98 donor. I have a buggy now so thats done with...

OK selling the last of my xj stuff. this was my donor XJ to swap parts to when I finally bent mine in half but Ive moved on to a buggy so this is just sitting. its a 1996 XJ 4 door that had a 4.0 and auto trans. power everything and interior is very clean. it has no engine, trans, or tcase...

Selling a set of bolt in XJ axles. Front axle High Pinion Dana 30 NON-disco housing 4.56 gears ARB locker Chromoly axles (27 spline) Upgraded steering Heavy Duty lower control arm mounts Spidertrax Wheel Spacers Rear Axle Chrysler 29 Spline 8.25 4.56 Gears ARB locker Chromoly axles Teraflex...

I got these with my bumper but ended up modding the bumper so I didn't need them. They are the heavier duty JCR ones $35 http://www.jcroffroad.com/product/XJNTSP.html These are factory ones I bought brand new a year or so ago and took out when I installed my new rear bumper. $25 These...

I have a set of lower tubular control arms. I think they are superlift. The bushings are in good shape and have grease zerks. They are in good shape and have no rust, dents, and are not bent. Asking $65 shipped. I also have a cable Posi-lock system to get rid of the crappy Vacum stuff on the...

Ok so I'm swaping axles on the old cherokee and I'm pretty set on running a front LP Dana 44 out of a FSJ with Ford hubs and 5x5.5 lug pattern. Now the tricky part is finding a mathcing rear axle. The Front is 60" WMS to WMS and 5x5.5 so the rear needs to be close. I have found a LP Dana 44 out...

I have all my brakes figured out now and I am going to machine the knuckles for the arms. The knuckls are from a 74' Jeep Cherokee FSJ. My question is when I mill the top of the knuckles so the arms have a perfectly flat mounting area do I machine them parallel to the spindle or perpendicular to...

So I am working on a HP44 and was told that in order to do high steer I would need either Chevy or Wagoneer Flat Top knuckles because ford knuckles did not have enough material to machine. While at the wrecking yard yesterday I pulled the knuckles, spindles, rotors, calipers, and brackets off of...

I came across a really good deal on some GOODYEAR BIAS WRANGLER RTII Tires and am just trying to see if anyone has experience with these. They are the tire that the military used on Hummers for alot of years and seem tough but I don't know how well they would grip slick rock and normal trail...

Ok well I tried to set my new 4:56 gears up but they are shot after only 3,000 miles. I'm not sure if I just screwed up or it was because I used Genuine gears. The front seems to be ok but the back whines really bad now and has .016 of backlash now. (Had .008 when I set it up) I talked to ORI in...

I just picked up a currie HD steering setup and got to thinking that when these tre's go out I am stuck going back to currie at 50 bucks each. so I was wondering if anyone found another place to get these mabey they are the same as ones from another vehicle and I could get them from Auto Zone...

First off just thought I'd say hi since I am new to the club and look forward to wheeling with all of you. but before I can do that I need a newer style 231. I put a sye in mine recently only to discover the front drive shaft out-put bearing in the front half of the case is loose in the case. I...

I searched but my problem is specific an really starting get on my nerves. Ok heres the deal I just put a dana 44 in the back of my 98 with new 4.56 gears a lock rite, new diff bearings, and wheel bearings. I also just rebuilt the transfer-case with all new bearings and a tera sye. also brand...

I just picked up 14" tomken NP231 transfer case skid for free but it is missing the back hmount that goes around the drive shaft and was hoping that someone had a picture of theirs mounted on their jeep. I found this pic http://www.industryfigure.com/berkeley/Jeep/armor/tms-1332-pa.jpg So...

Hey guys I am getting serious with my XJ now and its time for some armor. Does anyone have or know where I can get a heavy duty model factory 97-01 gas tank skid. I frequent Pull-n-save and Western Recycling but have had no luck. thanks for any help

I have a 98 cherokee and want to add the overhead console and my question is will my sun visors work with the console or do i need the ones from the jeep the console came out of. I did a search but came up with nothing. thanks for any help

I did a search and found all the bad but I thought i'd see if some one had something good to say. I am leaning towards detours but like the gas can carriers on the kennesaw bumper. also if any one had pics of the multi-carrier before installation and after. thanks all

hey guys got another question i have a 98 sport with the 4.0 and auto with the np231 and while in traffic the other day and just barely moving i noticed a grrrrr, grrrrr, grrrrr coming from the under carriage. i took the front shaft off to isolate it but same thing. strange because it...

I currently have a garvin rack with 4 hella 500 driving lights on it and when I use the lights at night I get heavy glare off the hood on to the windsheild, almost to the point where they are more blinding than a help. My jeep is white and i was just wondering if this is a common problem and if...