Search results

Automatic transmission I have a new grizzly locker in an 8.8 and it has a ton of play and slams into gear. The shop that installed it called Yukon and they said it is normal for some play. But it is a lot of play and isn’t a small clunk. It’s very harsh and sounds like someone is smacking it...

I just did a wj steering and brake swap and got new timken bearings from rockauto and never gave them a thought. I just installed them and ran it and within a couple miles I heard a horrible sound for a couple seconds and then it stopped. When I got back I found that 1 wheel stud fell out and...

Brakes worked fine before swap and now after I have blown the back right line twice in 2 days. I drove maybe 40 miles on the first one before it blew then this second one blew within 5 miles of driving. It seems like most of the pressure is going to that one corner based on the amount of heat I...

I just finished swapping out transmissions 2wd to 4wd. I reused the torque converter from the 2wd that was working fine before I touched anything. The car shifts harshly between park, reverse, neutral, and drive. When I drove it up and down the street it would also not shift out of first through...

I got ahold of a used np231 that looked like it has never been opened. When I opened it up for an sye install there was no oil pump. Did any years come without an oil pump or did the previous owner remove it? Do I need to go find a junkyard one or buy a new one or is anybody running without a...

I’ve searched and found a YouTube video that says size but not thread pitch or length. I have an aw4 that is missing the tail housing and i found a tail housing on eBay but no bolts. Anyone know what size they are? Thanks Sent from my iPhone using Tapatalk

I’ve collected a few parts through parts cars and Frankensteining a car together. They need to go. If anyone wants anything they are at my parents house and my dad is tossing everything that is still there next Wednesday. I believe everything is in working condition. The only thing not pictured...

Parts from extra engine 1995: Radiator sticker says spectra cu1193 08/16 Hesco water pump E fan Valve cover Fuel rail with injectors Accel wires and plugs Intake manifold Alternator Starter Lots o bolts Other randoms: Lower fixed control arms with uniball and new rebuild kit Black front...

Cheap xj buy turned nightmare. 1995 4.0 auto bone stock. New plugs, wires, cap, rotor, belt, refreshed grounds and now cooling system. Failed smog first time due to hi NO at 25mph. After the first test I changed every part of the cooling system due to it creeping up in temp while on the test...

I have a 1995 with the fuel vent line disconnected and I searched with results showing other people confused and no answers. Which port does the fuel vent line connect to on the canister? The one on the forward side has a plug in it and the one on the rear side has a cross in it and is plugged...

Anyone have a star smog shop they recommend in the San Diego area? Ive talked to a few in the oceanside, vista area and they are north of 70 dollars and no discounts for a retest if needed. Is that the new normal? Thanks

88 with the post for the latch assembly to close onto. It rattles like crazy and even opened on the freeway once. I could swap in a better post with less of a groove or a latch assembly same as is on there now. But after seeing a newer style one with a handle versus a button to open(97+?), is it...

Backstory: I removed my rear seat a long time ago because I don't bring more than one passenger in my jeep ever and I made a flat support for a memory foam bed in place of the seat. It is out of wood and I can store tools or camping supplies under the bemch/support/cabinet/whatever thing. I am...

Does the map sensor line diameter matter? Will the size of the line effect the vacuum amount required for the sensor? I found a leak yesterday from the connection into the throttle body and I want to tap the hole to put a more solid connection for the vacuum hose but I think any barbed connector...

88 stock engine ax15 trans Was running rich but perfect then no start. Cranked for a while and started once more. Drove two blocks to my friends house and now no start. I had a pile of parts I wanted to swap to improve reliablilty and mpgs. List of parts/things done: New tps from napa one week...

I tried searching for an answer but I couldn't find anything. I am looking for a reason why I have no vacuum to my charcoal canister. A couple weeks ago I experienced a significant amount of pressure in my fuel tank and since then I checked to make sure the vents are not clogged, then the lines...

My ball joints and axle seals are not great and after managing to tear everything apart, I got one ball joint half out with the O’Reilly rental kit and realized it is not the right kit for our jeeps. So I’m stuck in a crappy place right now needing a Jeep kit. Does anyone know where to rent one...

Today I drove quite a long ways but the last 50 miles was up a mountain from sea level to about 6000 ft. I did not drive fast or really hard. It’s kind of a gradual incline obviously since it takes 50 miles to go 6000 ft. But anyways at the top I noticed a lacking of power followed by a really...

I have read a lot about shackle relocation brackets and or boomerang shackles to allow for the shackle to travel more but I was looking at it today and it seems like it would be easy to just cut out the cross member behind and weld in some support, allowing for the shackle to have more room for...

88’ ax15 I just put 33” tires on and swapped an 8.25 rear axle with 4.56 gears and an lsd. I now have great power and get up but top out at 55mph via a gps. No front driveshaft as the front is still at 3.07 gearing. I expected a loss in mpg jumping to 33” tires but not a loss in top speed. It...