Search results

This damn thing loves to torment me. Got rid of my trans CEL codes but now I am pulling code p0118 on oriellys code puller and autozones is p0118 and p1898. I know the p0118 code is for the temp sensor. Unsure if it is for the one for the gauge or the one for the ecm. Do these jeeps...

looks like someone cross threaded 3 bolts for my trans pan. Anyone know what size bolt is used in the pan? Was thinking maybe try a slightly longer bolt or if I am lucky use a long bolt and a nut on the other side but I can't remember now if that is possible on the aw4. It is in a 97 xj.

My little red Duralast battery is crapping out on me and I'm wondering what the biggest battery (CCA wise) I can cram into my battery tray fairly easily is. It is a 97 XJ sport.

I nave new re3.5" coil springs, longer fixed rough country lower control arms, and a re adjustable track bar (it is centered) all newly installed. My passenger side coil is rubbing pretty bad on the bumpstop mount. I have noticed the slots for adjustment in the frame side lower control arm...

On the aw4 does anyone know how to actually disconnect the harness from transmission. The trans speed sensor was easy enough but there are other plugs that don't look like there is a way to disconnect. Just a rubber boot that pulls back and shows the stuff feeding into the trans.

Was working fine yesterday nowas I can't get it to blow out the front vents. I can make it blow defrost or out to the floor or both but not the dash vents. I didn't see any loose lines under the hood but I'm work so it was only a quick look turns out I can't make it come out the floor I just...

Just curious if anyone knows how far over I should redrill my track bar bracket to correct for the new re 3.5 coils I bought for my 97. I've read on other threads anywhere from 1/2"-1" and no one seems to remember for sure how far they moved it over. Also I can't seem to find a answer as to...

Let's pretend my over harness thread doesn't exist right now. (I do still need that harness to to but it's not my issue). My question is if I go out to the upull yard and pull the harness for the transmission from a 96 will it work? Yards local to me have 96 and down xjs only. Turns out I've...

Just want to clarify that the rear most line on the aw4 in my 97 is in fact the return before I go about flushing out my transfluid.

Anyone know of a place to get one? Long story short the previous owner dropped the trans and tcase but didn't unhook all the senors and trashed the harness. It has been hacked together and pinched multiple times between the trans and fire wall while they did whatever they did. I'm 99% sure it...

I know on larger lifts people will drill a new mount hole for the track bar but is it necessary for a budget boost using 2" coil spacers?

Got the add a leafs in the packs and back on my jeep. I did this in order to eliminate the lift block on the axle for the budget boost it is running. Rear end seems to sit higher and I have pretty much no shackle angle. They are straight up and down. I'm running factory shackles. I left the...

So I am fixing issues caused by the previous owner. One of the things they did was swap in a donor trans with a 231 case in place of the 242 after they blew it up. After some of the dumb things I've found on this jeep that they did I'm curious if they used the original driveshaft. Any of you...

Started doing this last night. Driving down the highway at 60 cruise works fine then it suddenly shut off. Green light stays lit but it acts like I hit the brake to to kick it off. It did start working again after a few tries turning it off and back on but it has continued to randomly turn...

I knocked out some of my brake gremlins and now have another one to deal with. It would actually be easier to list the parts of the braking system that I haven't changed but here is a list of everything new. Pads Rotors Calipers Wheel cylinders shoes and drums looked good so cleaned them off...

My exhaust has been bouncing around under my 97 and it has finally driven me insane enough to do something about it. All the rubber insulators for the hangers are shot. My question is does anyone know a part number for the with the rubber block that is located on the cross member next to the...

Arrrrg. So my new duralast gold brake pads and regular duralast rotors have squeaked since almost day one. Finally warrantied them out going With duralast gold rotors and gold pads. Got it all swapped out and the squeak is gone now replaced with knocking under braking. I've torn it apart 3 times...

So I ran into something unusual while working on my xj last night and wish I had a camera going at the time cause of how odd it was, at least to me. I was doing the passenger side axle ujoint and noticed that part of my bump stop (the rubber part) had rotted through and was bouncing around in...

So i have found the squeak that has been driving me bat **** crazy for the last week. Its my distributor. Pulled the cap and rotor shot a little oil on top of the bearing and squeak is gone but I am guessing it is going to need to be replaced. Seeings now I am strapped for cash and I work at the...

So I changed the mechanical fan clutch (duralast part# 922625) on my 97 cherokee and after I reassembled it the fan was just barely hitting the clutch on the ac compressor with 1 blade. Figured maybe the fan was tweaked and I didn't know it so I swapped on another fan blade I just happened to...