Search results

ok bulbs are there harness is there and plug is there I the tested switch I have continuity at the switch tested bulbs show continuity also but I have no continuity at the plug. any ideas I know the plug is wired to the harness other wise why would it be hanging there??? anyone???

transfer case rebuilt transmission installed everything runs fine put the rear drive shaft in and test drove. small leak at speedo sensor easy fix. will install front axle and drive shaft in next few weekends. harness was there to plug in transfer case now need to figure out the wires to the...

ordered the last seals and gaskets I think I will need. I am going to do the chain on the TC seeing as I will have it open to install the SYE. I will start cleaning up the JY parts in the next few days and get them prepped and ready for the swap. I am going to use por 15 on the axles and...

that's what I thought to just complete the circuit. plug a wire into both ends should complete the circuit. I tried with some gator clips. I will try with some wire. but I agree there might not be bulbs would be way to easy!!! I did read some place where a guy did a swap and even the dash lights...

I mean a way to test before I do the swap. I would like to see the dash lights light up before hand. but I see the harness and I can see where it is on the dash. hopefully it will just plug n play.

I am taking every ones advice and ordered the shift linage. I have ordered the terra track SYE and front and rear drive shafts. they will be here any day. I have been on a lot of overtime so I have not had much time to do anything else. I am seeing the wiring harness for the 4x4 light hanging...

just noticed the JY parts has a dana 35 rear end I know this is junk but again just using for snow in the winter can I use my stock dana 35 rear end with the conversion this would save me a lot of time and money

by the way I did find a stock drive shaft not dented on ebay for $50 but it is made in Canada. I just cant bring myself to buy it. My Harley was built in Wisconsin both jeeps in USA Springfield SOCOM 16 .308 USA and Schwinn bicycle was made in Chicago Ill. I will keep looking.

again I have no intentions of doing any serious 4 wheeling in my Cherokee I will save that for the Comanche I am doing this just so I can have the 4 wheel advantage if I have to drive this thing in the snow or for that matter if I have to park in the grass at a friends gathering and get stuck on...

that would be fine if I ever even planned on taking it off road. which I don't. it is because I am a boy with a frog in my pocket!!! I love my GIRL,GUNS,HARLEY and JEEP. I am an AMERICAN first and for most!!! and because I can!!! this jeep is kept in the garage 99% of the time that is why I have...

Ok so I went to the junk yard and the motor was locked up. All axles turned and linkages and shifters moved. So we pulled it all. Transmission front and rear axles transfer case drive shafts linkage plate and shifters even the control arms. the whole deal was just over $500. Now begins the clean...

so if I find a 4 door donor for either the 01 XJ 2 door or the 92 MJ do I have to have a different drive shaft. or will donor parts bolt right up to my 2 doors??? I would like to just swap all the parts. Are the wheel bases the same???

By the way I will keep you updated to what I do.

cool all kind of what I figured. You know I have never had the tranny out of the Cherokee. (never had to) This could be fun. I am going to hit the yard this weekend and get a better look at it. just a rare find for an 01 to be sitting in a yard not wrecked. body was straight. I am hoping to...

vin numbers says that both 01's have the same transmission??? I truly was looking for the 92 MJ swap when I found the 01 in the junk yard. Things to look for to make sure the junk yard 01 tranny and transfer case are good??? 15 years ago I had it in a transmission shop ( I was on crazy overtime)...

I have an 01 Cherokee sport 2 door 2 wheel drive. I have had it since 03. I found an 01 Cherokee sport 2 door 4 wheel drive in a junk yard and I am thinking of doing the swap. What all would I need from both 01's. both are 4.0 both are automatics both are 2 doors!!! I also have a 92 Comanche...