Search results

Will the sensor stick far enough into the stream of water to get an accurate reading from the stock Thermostat housing? Would that high flow housing cause any bottleneck if your not using anything else on the cooling system that is not high flow?

If you have a 97 or later where do you install an aftermarket temp sender for a temp gauge?

Ive got a 95 XJ, I have a sensor for the computer on the thermostat housing and ive got a sender for my aftermarket temp gauge on the head by the firewall. After 1996 where is the temp sender for the gauge go? Is the sensor on the thermostat housing after 1996 for the temp gauge and the...

The gap I speak of is between the mount on the engine and the rubber mounts where the long bolt goes through. I dont have 4 WD.

Thanks, One more Question.....:looney: I have a small gap, maybe 3/16th of an inch between the inside of the bracket and motor mount where the long bolt goes through. Is that anything to worry about? They seem to be the original bolts. If I had the time I would have replaced them with new...

A while ago when I installed a trans mount I had a heck of a time getting it back on, It wouldnt line up no matter what way I tried to reinstall it Seemed like the trans was shifted forward. I recently made sure I installed the correct one for my year, 95, it is the correct one. So about a...

Thats exactly what I was wondering, If its possible to cut open the factory one with a dremel, remove the old charcoal, clean up the inside and fill it with some kind of new charcoal and epoxy it back together? Ive seen it done on you tube but just not sure if the fish/aquarium charcoal would...

What height does the up country sit at? Or supposed to be?

I dont know the difference between those on quadrtec`s website but if your looking for stock leaf springs, the ones that many people use are Dorman, part number 929-301 made in columbia, just check and make sure they will work for that year jeep if you decide to try them.

I have a stock, 2 wheel drive XJ and I would love to try it........ :D

Fortunately I was able to get in touch with the company and they sent me out a new leaf, after I sent back the defective one. I thought I was going to have to buy a new bushing and take it somewhere to have it pressed in. Thanks for the replies.

Can the mojave trail be done without four wheel drive?

I found a pic online of an XJ with a hole cut very nicely in the floor above the front leaf mount showing the end of the bolt and threads but maybe it was a 2 door or a different year or something because it looked different than mine does. Directly above the mount is where two pieces of...

I bought a leaf online and it was sent without one of the bushing inserts. Anyone know where I can get just the insert? or do I have to buy a bushing and install the whole bushing? The online company I bought if from does not have a valid phone number or website and will not respond to my...

Are crown springs any good? Looking to replace my stock 95 springs. Thanks.

Thanks for the compliment. I am still wondering if the NSS i bought is a knock off? It looks original, it has the same exact markings and diagrams as mine. I wonder if its a direct copy or if someone is rebuilding used ones and selling them on Ebay? LOL....

Ok, after doing some more research I have come to the conclusion that Crown, ada-omix and, dorman are not good products....... I really dont want to put on cheap leaf springs and I cant find a good brand. All the ones I see are for lifts and off road. Anyone have an idea on a decent stock...

I have found a Dorman 929-301 online, Is Dorman a good brand?

Looking for stock leafs for a 95 2wd. Online, I see some on Ebay and Amazone really cheap with bushing already installed. Has anyone bought these and used them? Anyone know what brand and what the quality is like...

I did mine today, Installed a new one. After reading all the horror stories of how difficult it is to get them off I was a little curious, how could it be so difficult? It should just slide right off......... Well.......... Mine did not have anything preventing it from coming off, no dirt...